Remove core library and build files

[qmk_firmware.git] / protocol / pjrc / usb_mouse.c

diff --git a/protocol/pjrc/usb_mouse.c b/protocol/pjrc/usb_mouse.c
deleted file mode 100644 (file)
index d81db75..0000000
--- a/protocol/pjrc/usb_mouse.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* USB Mouse Plus Debug Channel Example for Teensy USB Development Board
- * http://www.pjrc.com/teensy/usb_mouse.html
- * Copyright (c) 2009 PJRC.COM, LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "usb_mouse.h"
-#include "print.h"
-#include "debug.h"
-
-
-uint8_t usb_mouse_protocol=1;
-
-
-int8_t usb_mouse_send(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons)
-{
-       uint8_t intr_state, timeout;
-
-       if (!usb_configured()) return -1;
-       if (x == -128) x = -127;
-       if (y == -128) y = -127;
-       if (wheel_v == -128) wheel_v = -127;
-       if (wheel_h == -128) wheel_h = -127;
-       intr_state = SREG;
-       cli();
-       UENUM = MOUSE_ENDPOINT;
-       timeout = UDFNUML + 50;
-       while (1) {
-               // are we ready to transmit?
-               if (UEINTX & (1<<RWAL)) break;
-               SREG = intr_state;
-               // has the USB gone offline?
-               if (!usb_configured()) return -1;
-               // have we waited too long?
-               if (UDFNUML == timeout) return -1;
-               // get ready to try checking again
-               intr_state = SREG;
-               cli();
-               UENUM = MOUSE_ENDPOINT;
-       }
-       UEDATX = buttons;
-       UEDATX = x;
-       UEDATX = y;
-        if (usb_mouse_protocol) {
-            UEDATX = wheel_v;
-            UEDATX = wheel_h;
-        }
-        
-       UEINTX = 0x3A;
-       SREG = intr_state;
-       return 0;
-}
-
-void usb_mouse_print(int8_t x, int8_t y, int8_t wheel_v, int8_t wheel_h, uint8_t buttons) {
-    if (!debug_mouse) return;
-    print("usb_mouse[btn|x y v h]: ");
-    phex(buttons); print("|");
-    phex(x); print(" ");
-    phex(y); print(" ");
-    phex(wheel_v); print(" ");
-    phex(wheel_h); print("\n");
-}