+++ /dev/null
-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2012.\r
-\r
- dean [at] fourwalledcubicle [dot] com\r
- www.lufa-lib.org\r
-*/\r
-\r
-/*\r
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this\r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in\r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- * \brief USB mode and feature support definitions.\r
- * \copydetails Group_USBMode\r
- *\r
- * \note This file should not be included directly. It is automatically included as needed by the USB driver\r
- * dispatch header located in LUFA/Drivers/USB/USB.h.\r
- */\r
-\r
-/** \ingroup Group_USB\r
- * \defgroup Group_USBMode USB Mode Tokens\r
- * \brief USB mode and feature support definitions.\r
- *\r
- * This file defines macros indicating the type of USB controller the library is being compiled for, and its\r
- * capabilities. These macros may then be referenced in the user application to selectively enable or disable\r
- * code sections depending on if they are defined or not.\r
- *\r
- * After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to\r
- * allow the user code to conditionally enable or disable code based on the USB controller family and allowable\r
- * USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for\r
- * the given compilation.\r
- *\r
- * @{\r
- */\r
-\r
-#ifndef __USBMODE_H__\r
-#define __USBMODE_H__\r
-\r
- /* Enable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- extern "C" {\r
- #endif\r
-\r
- /* Preprocessor Checks: */\r
- #if !defined(__INCLUDE_FROM_USB_DRIVER)\r
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.\r
- #endif\r
-\r
- /* Public Interface - May be used in end-application: */\r
- #if defined(__DOXYGEN__)\r
- /** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller\r
- * (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined.\r
- */\r
- #define USB_SERIES_2_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller\r
- * (i.e. ATMEGAxxU4) when defined.\r
- */\r
- #define USB_SERIES_4_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller\r
- * (i.e. AT90USBxxx6) when defined.\r
- */\r
- #define USB_SERIES_6_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller\r
- * (i.e. AT90USBxxx7) when defined.\r
- */\r
- #define USB_SERIES_7_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller\r
- * (i.e. AT32UC3A0*) when defined.\r
- */\r
- #define USB_SERIES_UC3A0_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller\r
- * (i.e. AT32UC3A1*) when defined.\r
- */\r
- #define USB_SERIES_UC3A1_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller\r
- * (i.e. AT32UC3A3*) when defined.\r
- */\r
- #define USB_SERIES_UC3A3_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A4 Series USB controller\r
- * (i.e. AT32UC3A4*) when defined.\r
- */\r
- #define USB_SERIES_UC3A4_AVR\r
- \r
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller\r
- * (i.e. AT32UC3B0*) when defined.\r
- */\r
- #define USB_SERIES_UC3B0_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller\r
- * (i.e. AT32UC3B1*) when defined.\r
- */\r
- #define USB_SERIES_UC3B1_AVR\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the XMEGA A1U Series USB controller\r
- * (i.e. ATXMEGA*A1U) when defined.\r
- */\r
- #define USB_SERIES_A1U_XMEGA\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the XMEGA A3U Series USB controller\r
- * (i.e. ATXMEGA*A3U) when defined.\r
- */\r
- #define USB_SERIES_A3U_XMEGA\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the XMEGA A4U Series USB controller\r
- * (i.e. ATXMEGA*A4U) when defined.\r
- */\r
- #define USB_SERIES_A4U_XMEGA\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the XMEGA B1 Series USB controller\r
- * (i.e. ATXMEGA*B1) when defined.\r
- */\r
- #define USB_SERIES_B1_XMEGA\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the XMEGA B3 Series USB controller\r
- * (i.e. ATXMEGA*B3) when defined.\r
- */\r
- #define USB_SERIES_B3_XMEGA\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller\r
- * (i.e. ATXMEGA*C3) when defined.\r
- */\r
- #define USB_SERIES_C3_XMEGA\r
-\r
- /** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller\r
- * (i.e. ATXMEGA*C4) when defined.\r
- */\r
- #define USB_SERIES_C4_XMEGA\r
-\r
- /** Indicates that the target microcontroller and compilation settings allow for the\r
- * target to be configured in USB Device mode when defined.\r
- */\r
- #define USB_CAN_BE_DEVICE\r
-\r
- /** Indicates that the target microcontroller and compilation settings allow for the\r
- * target to be configured in USB Host mode when defined.\r
- */\r
- #define USB_CAN_BE_HOST\r
-\r
- /** Indicates that the target microcontroller and compilation settings allow for the\r
- * target to be configured in either USB Device or Host mode when defined.\r
- */\r
- #define USB_CAN_BE_BOTH\r
- #else\r
- /* Macros: */\r
- #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \\r
- defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))\r
- #define USB_SERIES_2_AVR\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))\r
- #define USB_SERIES_4_AVR\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))\r
- #define USB_SERIES_6_AVR\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))\r
- #define USB_SERIES_7_AVR\r
- #define USB_CAN_BE_DEVICE\r
- #define USB_CAN_BE_HOST\r
- #elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \\r
- defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__))\r
- #define USB_SERIES_UC3A0_AVR32\r
- #define USB_CAN_BE_DEVICE\r
- #define USB_CAN_BE_HOST\r
- #elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \\r
- defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__))\r
- #define USB_SERIES_UC3A1_AVR32\r
- #define USB_CAN_BE_DEVICE\r
- #define USB_CAN_BE_HOST\r
- #elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \\r
- defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \\r
- defined(__AVR32_UC3A364__) || defined(__AVR32_UC3A364S__))\r
- #define USB_SERIES_UC3A3_AVR32\r
- #define USB_CAN_BE_DEVICE\r
- #define USB_CAN_BE_HOST\r
- #elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \\r
- defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \\r
- defined(__AVR32_UC3A464__) || defined(__AVR32_UC3A464S__))\r
- #define USB_SERIES_UC3A4_AVR32\r
- #define USB_CAN_BE_DEVICE\r
- #define USB_CAN_BE_HOST\r
- #elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \\r
- defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__))\r
- #define USB_SERIES_UC3B0_AVR32\r
- #define USB_CAN_BE_DEVICE\r
- #define USB_CAN_BE_HOST\r
- #elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \\r
- defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__))\r
- #define USB_SERIES_UC3B1_AVR32\r
- #define USB_CAN_BE_DEVICE\r
- #define USB_CAN_BE_HOST\r
- #elif (defined(__AVR_ATxmega128A1U__) || defined(__AVR_ATxmega64A1U__))\r
- #define USB_SERIES_A1U_XMEGA\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \\r
- defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__))\r
- #define USB_SERIES_A3U_XMEGA\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATxmega256A3BU__))\r
- #define USB_SERIES_A3BU_XMEGA\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__) || \\r
- defined(__AVR_ATxmega64A4U__) || defined(__AVR_ATxmega128A4U__))\r
- #define USB_SERIES_A4U_XMEGA\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATxmega128B1__) || defined(__AVR_ATxmega64B1__))\r
- #define USB_SERIES_B1_XMEGA\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__))\r
- #define USB_SERIES_B3_XMEGA\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \\r
- defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__) || \\r
- defined(__AVR_ATxmega384C3__))\r
- #define USB_SERIES_C3_XMEGA\r
- #define USB_CAN_BE_DEVICE\r
- #elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__))\r
- #define USB_SERIES_C4_XMEGA\r
- #define USB_CAN_BE_DEVICE\r
- #endif\r
-\r
- #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST))\r
- #define USB_CAN_BE_BOTH\r
- #endif\r
-\r
- #if defined(USB_HOST_ONLY)\r
- #if !defined(USB_CAN_BE_HOST)\r
- #error USB_HOST_ONLY is not available for the currently selected microcontroller model.\r
- #else\r
- #undef USB_CAN_BE_DEVICE\r
- #undef USB_CAN_BE_BOTH\r
- #endif\r
- #endif\r
-\r
- #if defined(USB_DEVICE_ONLY)\r
- #if !defined(USB_CAN_BE_DEVICE)\r
- #error USB_DEVICE_ONLY is not available for the currently selected microcontroller model.\r
- #else\r
- #undef USB_CAN_BE_HOST\r
- #undef USB_CAN_BE_BOTH\r
- #endif\r
- #endif\r
-\r
- #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))\r
- #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.\r
- #endif\r
-\r
- #if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST))\r
- #error The currently selected device or architecture is not supported under the USB component of the library.\r
- #endif\r
- #endif\r
-\r
- /* Disable C linkage for C++ Compilers: */\r
- #if defined(__cplusplus)\r
- }\r
- #endif\r
-\r
-#endif\r
-\r
-/** @} */\r
-\r
projects / qmk_firmware.git / blobdiff