Merge commit '60b30c036397cb5627fa374bb930794b225daa29' as 'lib/lufa'

[qmk_firmware.git] / lib / lufa / Projects / USBtoSerial / USBtoSerial.txt

diff --git a/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt b/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
new file mode 100644 (file)
index 0000000..0620f93
--- /dev/null
+++ b/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
@@ -0,0 +1,78 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+
+/** \mainpage USB to Serial Converter Project
+ *
+ *  \section Sec_Compat Project Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this project.
+ *
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *
+ *  \section Sec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this project.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Supported USB Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section Sec_Description Project Description:
+ *
+ *  USB to Serial bridge project. This project allows a USB AVR to serve
+ *  as a USB to USART bridge between a USB host and a device lacking a
+ *  USB port. When programmed into a USB AVR, the AVR will enumerate as a
+ *  virtual COM port.
+ *
+ *  The AVR's hardware USART's settings will change to mirror as closely as
+ *  possible the serial settings set on the host. However, due to hardware
+ *  limitations, some options may not be supported (baud rates with unacceptable
+ *  error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,
+ *  1.5 stop bits, parity other than none, even or odd).
+ *
+ *  After running this project for the first time on a new computer,
+ *  you will need to supply the .INF file located in this project
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section Sec_Options Project Options
+ *
+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td>
+ *     None
+ *    </td>
+ *   </tr>
+ *  </table>
+ */
+