Remove eeprom_f4 due to conflicting license

[qmk_firmware.git] / keyboards / wilba_tech / wt_main.c

diff --git a/keyboards/wilba_tech/wt_main.c b/keyboards/wilba_tech/wt_main.c
index 7a63ab5b74e628e762ecda01a4302b9ff3f11cc9..32fc6f9e4417854a7ee5a672c220763ec1ea50dd 100644 (file)
--- a/keyboards/wilba_tech/wt_main.c
+++ b/keyboards/wilba_tech/wt_main.c
@@ -15,11 +15,16 @@
  */
 
 #include "quantum.h"
-#ifdef WT_MONO_BACKLIGHT
+
+// Check that no backlight functions are called
+#if RGB_BACKLIGHT_ENABLED
+#include "keyboards/wilba_tech/wt_rgb_backlight.h"
+#endif // RGB_BACKLIGHT_ENABLED
+#if MONO_BACKLIGHT_ENABLED
 #include "keyboards/wilba_tech/wt_mono_backlight.h"
-#endif
-#include "keyboards/zeal60/zeal60_api.h" // Temporary hack
-#include "keyboards/zeal60/zeal60_keycodes.h" // Temporary hack
+#endif // MONO_BACKLIGHT_ENABLED
+#include "keyboards/wilba_tech/via_api.h" // Temporary hack
+#include "keyboards/wilba_tech/via_keycodes.h" // Temporary hack
 
 #include "raw_hid.h"
 #include "dynamic_keymap.h"
@@ -145,6 +150,23 @@ void raw_hid_receive( uint8_t *data, uint8_t length )
                        break;
                }
 #endif // DYNAMIC_KEYMAP_ENABLE
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+               case id_backlight_config_set_value:
+               {
+                       backlight_config_set_value(command_data);
+                       break;
+               }
+               case id_backlight_config_get_value:
+               {
+                       backlight_config_get_value(command_data);
+                       break;
+               }
+               case id_backlight_config_save:
+               {
+                       backlight_config_save();
+                       break;
+               }
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
                case id_eeprom_reset:
                {
                        eeprom_reset();
@@ -180,29 +202,33 @@ void main_init(void)
        // If the EEPROM has the magic, the data is good.
        // OK to load from EEPROM.
        if (eeprom_is_valid()) {
-               //backlight_config_load();
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+               backlight_config_load();
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
        } else  {
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
                // If the EEPROM has not been saved before, or is out of date,
                // save the default values to the EEPROM. Default values
-               // come from construction of the zeal_backlight_config instance.
-               //backlight_config_save();
+               // come from construction of the backlight_config instance.
+               backlight_config_save();
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
 #ifdef DYNAMIC_KEYMAP_ENABLE
                // This resets the keymaps in EEPROM to what is in flash.
                dynamic_keymap_reset();
                // This resets the macros in EEPROM to nothing.
                dynamic_keymap_macro_reset();
-#endif
+#endif // DYNAMIC_KEYMAP_ENABLE
                // Save the magic number last, in case saving was interrupted
                eeprom_set_valid(true);
        }
-
-#ifdef WT_MONO_BACKLIGHT
+       
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
        // Initialize LED drivers for backlight.
        backlight_init_drivers();
 
        backlight_timer_init();
        backlight_timer_enable();
-#endif
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
 }
 
 void bootmagic_lite(void)
@@ -213,8 +239,8 @@ void bootmagic_lite(void)
 
        // We need multiple scans because debouncing can't be turned off.
        matrix_scan();
-       wait_ms(DEBOUNCING_DELAY);
-       wait_ms(DEBOUNCING_DELAY);
+       wait_ms(DEBOUNCE);
+       wait_ms(DEBOUNCE);
        matrix_scan();
 
        // If the Esc (matrix 0,0) is held down on power up,
@@ -234,15 +260,19 @@ void matrix_init_kb(void)
 
 void matrix_scan_kb(void)
 {
-#ifdef WT_MONO_BACKLIGHT
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
        // This only updates the LED driver buffers if something has changed.
        backlight_update_pwm_buffers();
-#endif
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
        matrix_scan_user();
 }
 
 bool process_record_kb(uint16_t keycode, keyrecord_t *record)
 {
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+       process_record_backlight(keycode, record);
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+
        switch(keycode) {
                case FN_MO13:
                        if (record->event.pressed) {
@@ -280,3 +310,74 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record)
 
        return process_record_user(keycode, record);
 }
+
+// This overrides the one in quantum/keymap_common.c
+uint16_t keymap_function_id_to_action( uint16_t function_id )
+{
+       // Zeal60 specific "action functions" are 0xF00 to 0xFFF
+       // i.e. F(0xF00) to F(0xFFF) are mapped to
+       // enum zeal60_action_functions by masking last 8 bits.
+       if ( function_id >= 0x0F00 && function_id <= 0x0FFF )
+       {
+               uint8_t id = function_id & 0xFF;
+               switch ( id ) {
+                       case TRIPLE_TAP_1_3:
+                       case TRIPLE_TAP_2_3:
+                       {
+                               return ACTION_FUNCTION_TAP(id);
+                               break;
+                       }
+                       default:
+                               break;
+               }
+       }
+
+       return pgm_read_word(&fn_actions[function_id]);
+}
+
+
+// Zeal60 specific "action functions"
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+       switch (id)
+       {
+       case TRIPLE_TAP_1_3:
+       case TRIPLE_TAP_2_3:
+               if (record->event.pressed) {
+                       layer_on( id == TRIPLE_TAP_1_3 ? 1 : 2 );
+                       if (record->tap.count && !record->tap.interrupted) {
+                               if (record->tap.count >= 3) {
+                                       layer_invert(3);
+                               }
+                       } else {
+                               record->tap.count = 0;
+                       }
+               } else {
+                       layer_off( id == TRIPLE_TAP_1_3 ? 1 : 2 );
+               }
+               break;
+       }
+}
+
+void led_set_kb(uint8_t usb_led)
+{
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+       backlight_set_indicator_state(usb_led);
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+       led_set_user(usb_led);
+}
+
+void suspend_power_down_kb(void)
+{
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+       backlight_set_suspend_state(true);
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+}
+
+void suspend_wakeup_init_kb(void)
+{
+#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+       backlight_set_suspend_state(false);
+#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
+}
+