fix the clueboard layout json

[qmk_firmware.git] / keyboards / tada68 / readme.md

diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md
index 1986008bdc89ba65dfd333f3cfcfec6bb133f527..a18758ac944911de8129e18c6f9f6b6d11e0bbaf 100755 (executable)
--- a/keyboards/tada68/readme.md
+++ b/keyboards/tada68/readme.md
@@ -9,21 +9,23 @@ Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/products/tada68-m
 
 Make example for this keyboard (after setting up your build environment):
 
-    make tada68-default-bin
+    make tada68:default:bin
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
 ## Flashing Instructions
 
-1) from the `qmk_firmware` directory run:
+*Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. _It is much too easy to do!  _
+
+1) from the `qmk_firmware\` directory run:
 ```
-$ make tada68-default-bin
+$ make tada68:default:flashbin
 ```
 
-2) hit the reset button on the TADA, the lights will start flashing.
+2) Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.
 
 3) You'll see a new drive on your computer called TADA68. Backup the original factory `FLASH.BIN` file thats inside it.
 
 4) Delete `FLASH.BIN` from the TADA drive and copy `tada68_default.bin` that was generated at the root of the qmk directory into the TADA drive.
 
-5) Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!
+5) *Do not eject the USB device.* Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!