Backlight abstraction and other changes (#439)

[qmk_firmware.git] / keyboards / sixkeyboard / README.md

diff --git a/keyboards/sixkeyboard/README.md b/keyboards/sixkeyboard/README.md
deleted file mode 100644 (file)
index 7d78a0c..0000000
--- a/keyboards/sixkeyboard/README.md
+++ /dev/null
@@ -1,18 +0,0 @@
-# Techkeys SixKeyBoard
-
-[Get one here!](http://techkeys.us/collections/accessories/products/sixkeyboard)
-
-The schematic is like this:
-
-```
- switches       leds
-,--+--+--.   ,--+--+--.
-|C7|B7|B5|   |C6|B6|B4|
-+--+--+--+   +--+--+--+
-|D6|D1|D4|   |D5|D2|D3|
-`--+--+--'   `--+--+--'
-```
-
-The LED on the bottom is `C4`. All 7 of the leds are turned on when the keyboard boots-up in the `sixkeyboard.c` file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.
-
-There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.
\ No newline at end of file