simple readme fix

[qmk_firmware.git] / keyboards / rama / m6_b / config.h

diff --git a/keyboards/rama/m6_b/config.h b/keyboards/rama/m6_b/config.h
index 1adaad3f9ed1208955316595c71b5b2639f6cb0c..015bc6df8a4dfcf92ebc1f2c58921965ca38b3b5 100644 (file)
--- a/keyboards/rama/m6_b/config.h
+++ b/keyboards/rama/m6_b/config.h
@@ -43,16 +43,15 @@
 #define MATRIX_COL_PINS { D4, B5, F4, D7, C6, F6 }
 #define UNUSED_PINS
 
-/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
+#define DEBOUNCE 5
 
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
@@ -102,15 +101,55 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_BACKLIGHT_ENABLED 1
 
-#define DYNAMIC_KEYMAP_LAYER_COUNT 4
+// This conditionally compiles the backlight code for M6-B specifics
+#define RGB_BACKLIGHT_M6_B
+
+// enable/disable LEDs based on layout
+#define RGB_BACKLIGHT_USE_SPLIT_BACKSPACE 0
+#define RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT 0
+#define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 0
+#define RGB_BACKLIGHT_USE_7U_SPACEBAR 0
+#define RGB_BACKLIGHT_USE_ISO_ENTER 0
+#define RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS 0
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define RGB_BACKLIGHT_BRIGHTNESS 255
 
+// the default effect (RGB test)
+#define RGB_BACKLIGHT_EFFECT 255
+
+// the default effect speed (0-3)
+#define RGB_BACKLIGHT_EFFECT_SPEED 0
+
+// the default color1 and color2
+#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
+#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
+
+// These define which keys in the matrix are alphas/mods
+// Used for backlight effects so colors are different for
+// alphas vs. mods
+// Each value is for a row, bit 0 is column 0
+// Alpha=0 Mod=1
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_0 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_1 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_2 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_3 0
+#define RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 0
+
+#define RGB_BACKLIGHT_CAPS_LOCK_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_1_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_2_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+#define RGB_BACKLIGHT_LAYER_3_INDICATOR { .color = { .h = 0, .s = 0 }, .index = 255 }
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 4
 
 // EEPROM usage
 
@@ -120,10 +159,14 @@
 // Bump this every time we change what we store
 // This will automatically reset the EEPROM with defaults
 // and avoid loading invalid data from the EEPROM
-#define EEPROM_VERSION 0x07
+#define EEPROM_VERSION 0x08
 #define EEPROM_VERSION_ADDR 34
 
 // Backlight config starts after EEPROM version
 #define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR 35
-// Dynamic keymap starts after backlight config (35+37)
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 72
+// Dynamic keymap starts after backlight config (35+43)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 78
+// Dynamic macro starts after dynamic keymaps (78+(4*6*2)) = (78+48)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 126
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 898
+#define DYNAMIC_KEYMAP_MACRO_COUNT 16