use built-in arm stuff

[qmk_firmware.git] / keyboards / preonic / rev3 / boards / GENERIC_STM32_F303XC / board.c

diff --git a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c b/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c
deleted file mode 100644 (file)
index 4331155..0000000
--- a/keyboards/preonic/rev3/boards/GENERIC_STM32_F303XC/board.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}