+#pragma message "You may need to add LAYOUT_planck_grid to your keymap layers - see default for an example"
#include "planck.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#include "version.h"
/* Each layer is given a name to aid in readability, which is then
- used in the keymap matrix below. The underscores do not denote
+ used in the keymap matrix below. The underscores do not denote
anything - you can have a layer called STUFF or any other name.
Layer names don't all need to be of the same length, obviously, and
/* This was originally based on planck/keymaps/default/default.c, and
then cbbrowne has revised things */
-/* Things I did not like about the default mapping
+/* Things I did not like about the default mapping
- I found control too hard to get to. I use it more than Tab, so
switched it there.
- All of the above are done :-)
- - Dropped out support for Dvorak and friends. They aren't
+ - Dropped out support for Dvorak and friends. They aren't
improvements to me
*/
/* Some interesting things implemented
- - There is a macro that writes out "cbbrowne" to show that I could
+ - There is a macro that writes out "cbbrowne" just to show that I
+ could
- There is a (somewhat cruddy) linear congruential random number
generator.
- - I would like to be seeding it with clock info to make it look
- more random
+ - I seed it somewhat with clock info to make it look more random
- There are two macros that use the random number generators
- one, M_RANDDIGIT, generates a random digit based on state
of the random number generator
- Need to think about what zsh and readline actions I use lots
- Ought to ensure that Control-Alt-Delete is convenient enough
- - How about Alt-F1 thru Alt-F8?
+ - How about Alt-F1 thru Alt-F8? Not yet...
- What's the keystroke to get from X to console these days?
- A layer for doing console switching would not be a bad idea
- - I haven't got page-up/page-down, let's have that...
+
+ - I'm messing with jeremy-dev's keymap that shifts everything
+ outwards. Gotta figure out how to make it sensible...
*/
enum layers {
_RAISE, /* Raised layer, where top line has digits 1234567890 */
_KEYPAD, /* Key pad */
_ADJUST, /* Special Adjust layer coming via tri-placement */
+
+};
+
+enum my_keycodes {
+ MY_ABVE = SAFE_RANGE,
+ MY_BELW,
+ MY_TERM,
+ MY_DEQL, // /=
+ MY_MEQL, // *=
+ MY_SEQL, // -=
+ MY_PEQL, // +=
+ MY_NEQL, // !=
+ MY_LTGT, // <>
+ MY_DPIP, // ||
+ MY_DAMP, // &&
};
enum macro_id {
{_______, RANDDIG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ },
{_______, RANDALP, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______ },
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }
-}
+}
};
+
/* What is fn_actions actually used for??? */
const uint16_t PROGMEM fn_actions[] = {
};
} else {
unregister_code(KC_RSFT);
}
- break;
+ break;
case M_USERNAME:
if (record->event.pressed) {
SEND_STRING("cbbrowne");
if (record->event.pressed) {
/* Here, we mix the LCRNG with low bits from one of the system
clocks via XOR in the theory that this may be more random
- than either separately */
+ than either separately */
rval = (random_value ^ clockbyte) % 10;
/* Note that KC_1 thru KC_0 are a contiguous range */
register_code (KC_1 + rval);
a letter chosen at random */
/* Here, we mix the LCRNG with low bits from one of the system
clocks via XOR in the theory that this may be more random
- than either separately */
+ than either separately */
random_value = ((random_value + randadd) * randmul) % randmod;
if (record->event.pressed) {
rval = (random_value ^ clockbyte) % 26;
if (record->event.pressed)
{
layer_on(_RAISE);
-#ifdef BACKLIGHT_ENABLE
- breathing_speed_set(2);
+#ifdef BACKLIGHT_BREATHING
+ breathing_period_set(2);
breathing_pulse();
#endif
update_tri_layer(_LOWER, _RAISE, _ADJUST);
if (record->event.pressed)
{
layer_on(_LOWER);
-#ifdef BACKLIGHT_ENABLE
- breathing_speed_set(2);
+#ifdef BACKLIGHT_BREATHING
+ breathing_period_set(2);
breathing_pulse();
#endif
update_tri_layer(_LOWER, _RAISE, _ADJUST);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
break;
-
+
}
return MACRO_NONE;
};
+
+void press_key(uint16_t key) {
+ register_code(key);
+ unregister_code(key);
+}
+
+void press_two_keys(uint16_t key1, uint16_t key2) {
+ register_code(key1);
+ register_code(key2);
+ unregister_code(key2);
+ unregister_code(key1);
+}
+
+void press_three_keys(uint16_t key1, uint16_t key2, uint16_t key3) {
+ register_code(key1);
+ register_code(key2);
+ register_code(key3);
+ unregister_code(key3);
+ unregister_code(key2);
+ unregister_code(key1);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case MY_BELW:
+ if (record->event.pressed) {
+ press_two_keys(KC_LGUI, KC_RGHT);
+ press_key(KC_ENT);
+ }
+
+ return false;
+
+ case MY_ABVE:
+ if (record->event.pressed) {
+ press_two_keys(KC_LGUI, KC_LEFT);
+ press_key(KC_ENT);
+ press_key(KC_UP);
+ }
+
+ return false;
+
+ case MY_TERM:
+ if (record->event.pressed) {
+ press_three_keys(KC_LGUI, KC_LSFT, KC_ENT);
+ }
+
+ return false;
+
+ case MY_DEQL: // /=
+ if (record->event.pressed) {
+ press_key(KC_SLSH);
+ press_key(KC_EQL);
+ }
+
+ return false;
+
+ case MY_MEQL: // *=
+ if (record->event.pressed) {
+ press_two_keys(KC_LSFT, KC_ASTR);
+ press_key(KC_EQL);
+ }
+
+ return false;
+
+ case MY_SEQL: // -=
+ if (record->event.pressed) {
+ press_key(KC_MINS);
+ press_key(KC_EQL);
+ }
+
+ return false;
+
+ case MY_PEQL: // +=
+ if (record->event.pressed) {
+ press_two_keys(KC_LSFT, KC_PLUS);
+ press_key(KC_EQL);
+ }
+
+ return false;
+
+ case MY_NEQL: // !=
+ if (record->event.pressed) {
+ press_two_keys(KC_LSFT, KC_EXLM);
+ press_key(KC_EQL);
+ }
+
+ return false;
+
+ case MY_LTGT: // <>
+ if (record->event.pressed) {
+ press_two_keys(KC_LSFT, KC_LABK);
+ press_two_keys(KC_LSFT, KC_RABK);
+ }
+
+ return false;
+
+ case MY_DPIP: // ||
+ if (record->event.pressed) {
+ press_two_keys(KC_LSFT, KC_PIPE);
+ press_two_keys(KC_LSFT, KC_PIPE);
+ }
+
+ return false;
+
+ case MY_DAMP: // &&
+ if (record->event.pressed) {
+ press_two_keys(KC_LSFT, KC_AMPR);
+ press_two_keys(KC_LSFT, KC_AMPR);
+ }
+
+ return false;
+ }
+
+ return true;
+}
+
projects / qmk_firmware.git / blobdiff