Document the correct path to the split keyboard EEPROM files (#4585)

[qmk_firmware.git] / keyboards / minidox / readme.md

diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md
index c15fd244a4e24248db263c72b8b723b785e9436c..9ec306421d15ef25d85990ab4d95b0eea15450d7 100644 (file)
--- a/keyboards/minidox/readme.md
+++ b/keyboards/minidox/readme.md
@@ -5,12 +5,12 @@ MiniDox
 
 A compact version of the ErgoDox
 
-Keyboard Maintainer: That-Canadian
+Keyboard Maintainer: That-Canadian  
 Hardware Supported: MiniDox PCB rev1 Pro Micro
 
 Make example for this keyboard (after setting up your build environment):
 
-    make minidox-rev1-default
+    make minidox/rev1:default
 
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
@@ -22,8 +22,8 @@ Flashing
 -------
 Note: Most of this is copied from the Let's Split readme, because it is awesome
 
-From the `minidox` directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
-Example: `make rev1-default-avrdude`
+From the root directory run `make PROJECT:KEYMAP:avrdude` for automatic serial port resolution and flashing.
+Example: `make minidox/rev1:default:avrdude`
 
 Choosing which board to plug the USB cable into (choosing Master)
 --------
@@ -54,13 +54,13 @@ file will run on both hands instead of having to flash left and right handed
 versions of the firmware to each half. To flash the EEPROM file for the left
 half run:
 ```
-avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep"
 // or the equivalent in dfu-programmer
 
 ```
 and similarly for right half
 ```
-avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
+avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-righthand.eep"
 // or the equivalent in dfu-programmer
 ```