[Keyboard] Reduce compile size of the Lily58 Keyboard (#5412)

[qmk_firmware.git] / keyboards / lily58 / keymaps / default / keymap.c

diff --git a/keyboards/lily58/keymaps/default/keymap.c b/keyboards/lily58/keymaps/default/keymap.c
index 8d770581293d1c08477efc6213f0d1aa9a3630db..b8dda17d535d25a206f1f471e51db96aee2335b4 100644 (file)
--- a/keyboards/lily58/keymaps/default/keymap.c
+++ b/keyboards/lily58/keymaps/default/keymap.c
@@ -1,11 +1,27 @@
 #include QMK_KEYBOARD_H
 
+#ifdef PROTOCOL_LUFA
+  #include "lufa.h"
+  #include "split_util.h"
+#endif
+#ifdef SSD1306OLED
+  #include "ssd1306.h"
+#endif
+
+
 extern keymap_config_t keymap_config;
 
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+#endif
+
+extern uint8_t is_master;
+
 #define _QWERTY 0
 #define _LOWER 1
 #define _RAISE 2
-#define _ADJUST 16
+#define _ADJUST 3
 
 enum custom_keycodes {
   QWERTY = SAFE_RANGE,
@@ -88,28 +104,103 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
  * |      |      |      |      |      |      |                    |      |      |      |      |      |      |
  * |------+------+------+------+------+------|                    |------+------+------+------+------+------|
- * |      |      |      |      |      |      |-------.    ,-------|      |      |      |      |      |      |
+ * |      |      |      |      |      |      |-------.    ,-------|      |      |RGB ON| HUE+ | SAT+ | VAL+ |
  * |------+------+------+------+------+------|       |    |       |------+------+------+------+------+------|
- * |      |      |      |      |      |      |-------|    |-------|      |      |      |      |      |      |
+ * |      |      |      |      |      |      |-------|    |-------|      |      | MODE | HUE- | SAT- | VAL- |
  * `-----------------------------------------/       /     \      \-----------------------------------------'
  *                   | LAlt | LGUI |LOWER | /Space  /       \Enter \  |RAISE |BackSP| RGUI |
  *                   |      |      |      |/       /         \      \ |      |      |      |
  *                   `----------------------------'           '------''--------------------'
- */ 
+ */
   [_ADJUST] = LAYOUT( \
   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, \
-  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,\
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                   XXXXXXX, XXXXXXX, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
+  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD,\
                              _______, _______, _______, _______, _______,  _______, _______, _______ \
   )
 };
 
+int RGB_current_mode;
+
+// Setting ADJUST layer RGB back to default
+void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
+  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
+    layer_on(layer3);
+  } else {
+    layer_off(layer3);
+  }
+}
+
+void matrix_init_user(void) {
+    #ifdef RGBLIGHT_ENABLE
+      RGB_current_mode = rgblight_config.mode;
+    #endif
+    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
+    #ifdef SSD1306OLED
+        iota_gfx_init(!has_usb());   // turns on the display
+    #endif
+}
+
+//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
+#ifdef SSD1306OLED
+
+// When add source files to SRC in rules.mk, you can use functions.
+const char *read_layer_state(void);
+const char *read_logo(void);
+void set_keylog(uint16_t keycode, keyrecord_t *record);
+const char *read_keylog(void);
+const char *read_keylogs(void);
+
+// const char *read_mode_icon(bool swap);
+// const char *read_host_led_state(void);
+// void set_timelog(void);
+// const char *read_timelog(void);
+
+void matrix_scan_user(void) {
+   iota_gfx_task();
+}
+
+void matrix_render_user(struct CharacterMatrix *matrix) {
+  if (is_master) {
+    // If you want to change the display of OLED, you need to change here
+    matrix_write_ln(matrix, read_layer_state());
+    matrix_write_ln(matrix, read_keylog());
+    matrix_write_ln(matrix, read_keylogs());
+    //matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
+    //matrix_write_ln(matrix, read_host_led_state());
+    //matrix_write_ln(matrix, read_timelog());
+  } else {
+    matrix_write(matrix, read_logo());
+  }
+}
+
+void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
+  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
+    memcpy(dest->display, source->display, sizeof(dest->display));
+    dest->dirty = true;
+  }
+}
+
+void iota_gfx_task_user(void) {
+  struct CharacterMatrix matrix;
+  matrix_clear(&matrix);
+  matrix_render_user(&matrix);
+  matrix_update(&display, &matrix);
+}
+#endif//SSD1306OLED
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  if (record->event.pressed) {
+#ifdef SSD1306OLED
+    set_keylog(keycode, record);
+#endif
+    // set_timelog();
+  }
+
   switch (keycode) {
     case QWERTY:
-            if (record->event.pressed) {
+      if (record->event.pressed) {
         set_single_persistent_default_layer(_QWERTY);
       }
       return false;
@@ -117,31 +208,31 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
     case LOWER:
       if (record->event.pressed) {
         layer_on(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
       } else {
         layer_off(_LOWER);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
       }
       return false;
       break;
     case RAISE:
       if (record->event.pressed) {
         layer_on(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
       } else {
         layer_off(_RAISE);
-        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
       }
       return false;
       break;
     case ADJUST:
-      if (record->event.pressed) {
-        layer_on(_ADJUST);
-      } else {
-        layer_off(_ADJUST);
-      }
-      return false;
-      break;
+        if (record->event.pressed) {
+          layer_on(_ADJUST);
+        } else {
+          layer_off(_ADJUST);
+        }
+        return false;
+        break;
   }
   return true;
-}
\ No newline at end of file
+}