Add support for KMAC

[qmk_firmware.git] / keyboards / kmac / kmac.c

diff --git a/keyboards/kmac/kmac.c b/keyboards/kmac/kmac.c
new file mode 100644 (file)
index 0000000..34647e8
--- /dev/null
+++ b/keyboards/kmac/kmac.c
@@ -0,0 +1,109 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kmac.h"
+
+void matrix_init_kb(void) {
+       // put your keyboard start-up code here
+       // runs once when the firmware starts up
+       led_init_ports();
+       matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+       // put your looping keyboard code here
+       // runs every cycle (a lot)
+
+       matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+       // put your per-action keyboard code here
+       // runs for every action, just before processing by the firmware
+
+       return process_record_user(keycode, record);
+}
+
+void led_init_ports(void) {
+    DDRB |= (1<<0); // OUT
+    DDRE |= (1<<6); // OUT
+}
+
+/* LED pin configuration
+ * Scroll Lock: Low PE6
+ * Caps Lock: Low PB0
+ */
+void led_set_kb(uint8_t usb_led) {
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
+    {
+        PORTB &= ~(1<<0); // LO
+    }
+    else
+    {
+        PORTB |= (1<<0); // HI
+    }
+
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+    {
+        PORTE &= ~(1<<6); // LO
+    }
+    else
+    {
+        PORTE |= (1<<6); // HI
+    }
+
+       led_set_user(usb_led);
+}
+
+void backlight_init_ports(void) {
+       DDRB |= (1<<1) | (1<<2) | (1<<3) | (1<<4); // OUT
+       DDRD |= (1<<7); // OUT
+}
+
+/* Backlight pin configuration
+ * F-row: High PB1
+ * W: Low PB4
+ * A: Low PB2
+ * S: Low PB3
+ * D: Low PD7
+ */
+void backlight_set(uint8_t level)
+{
+    // F-row
+    if(level & (1<<0))
+    {
+        PORTB |= (1<<1); // HI
+    }
+    else
+    {
+        PORTB &= ~(1<<1); // LO
+    }
+
+    // WASD
+    if(level & (1<<1))
+    {
+        PORTB &= ~(1<<4); // LO
+        PORTB &= ~(1<<2); // LO
+        PORTB &= ~(1<<3); // LO
+        PORTD &= ~(1<<7); // LO
+    }
+    else
+    {
+        PORTB |= (1<<4); // HI
+        PORTB |= (1<<2); // HI
+        PORTB |= (1<<3); // HI
+        PORTD |= (1<<7); // HI
+    }
+}