Backlight abstraction and other changes (#439)

[qmk_firmware.git] / keyboards / kc60 / kc60.c

diff --git a/keyboards/kc60/kc60.c b/keyboards/kc60/kc60.c
index 0a578b2b88fd939150f42711549000d6aa27b002..746ac634a3dc2bc0219b3202b7656c468200da25 100644 (file)
--- a/keyboards/kc60/kc60.c
+++ b/keyboards/kc60/kc60.c
@@ -1,111 +1 @@
 #include "kc60.h"
-
-__attribute__ ((weak))
-  void matrix_init_user(void) {
-    // leave this function blank - it can be defined in a keymap file
-  };
-
-__attribute__ ((weak))
-  void matrix_scan_user(void) {
-    // leave this function blank - it can be defined in a keymap file
-  }
-
-__attribute__ ((weak))
-  bool process_action_user(keyrecord_t *record) {
-    // leave this function blank - it can be defined in a keymap file
-    return true;
-  }
-
-__attribute__ ((weak))
-  void led_set_user(uint8_t usb_led) {
-    // leave this function blank - it can be defined in a keymap file
-  }
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-#ifdef BACKLIGHT_ENABLE
-  backlight_init_ports();
-#endif
-
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_action_kb(keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_action_user(record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  led_set_user(usb_led);
-}
-
-#ifdef BACKLIGHT_ENABLE
-#define CHANNEL OCR1B
-
-void backlight_init_ports()
-{
-
-  // Setup PB6 as output and output low.
-  DDRB |= (1<<6);
-  PORTB &= ~(1<<6);
-
-  // Use full 16-bit resolution. 
-  ICR1 = 0xFFFF;
-
-  // I could write a wall of text here to explain... but TL;DW
-  // Go read the ATmega32u4 datasheet.
-  // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
-
-  // Pin PB7 = OCR1C (Timer 1, Channel C)
-  // Compare Output Mode = Clear on compare match, Channel C = COM1B1=1 COM1C0=0
-  // (i.e. start high, go low when counter matches.)
-  // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
-  // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
-
-  TCCR1A = _BV(COM1B1) | _BV(WGM11); // = 0b00001010;
-  TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
-
-  backlight_init();
-}
-
-void backlight_set(uint8_t level)
-{
-  // Prevent backlight blink on lowest level
-  PORTB &= ~(_BV(PORTB6));
-
-  if ( level == 0 )
-  {
-    // Turn off PWM control on PB6, revert to output low.
-    TCCR1A &= ~(_BV(COM1B1));
-    CHANNEL = 0x0;
-  }
-  else if ( level == BACKLIGHT_LEVELS)
-  {
-    // Turn on PWM control of PB6
-    TCCR1A |= _BV(COM1B1);
-    // Set the brightness
-    CHANNEL = 0xFFFF;
-  }
-  else        
-  {
-    // Turn on PWM control of PB6
-    TCCR1A |= _BV(COM1B1);
-    // Set the brightness
-    CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
-  }
-}
-
-#endif