==========================
This is a port of the QMK firmware for boards that are based on the
-ps2avrGB firmware, like the [ps2avrGB keyboard] (https://www.keyclack.com/product/gb-ps2avrgb/), for use on the JJ50, a preonic-like board.
+ps2avrGB firmware, like the [ps2avrGB keyboard](https://www.keyclack.com/product/gb-ps2avrgb/), for use on the JJ50, a preonic-like board.
Most of the code was taken and amended from YMD96, which in itself was taken from ps2avrGB and amended by Andrew Novak.
using Bootmapper Client to change any keyboard settings, since not all the
USB report options are supported.
-Hardware Supported: JJ50 with the ATmega32a chip.
-Hardware Availability: The JJ50 PCB is available from kprepublic on AliExpress and suchlike.
+Hardware Supported: JJ50 with the ATmega32a chip.
+Hardware Availability: [KPrepublic on AliExpress](https://www.aliexpress.com/item/jj50-v1-0-Custom-Mechanical-Keyboard-50-PCB-programmed-50-preonic-layouts-bface-firmware-with-rgb/32848915277.html)
-This version by Wayne K Jones (github.com/WarmCatUK)
+This version by [Wayne K. Jones](github.com/WarmCatUK).
## Installing and Building
```
It should detect the keyboard and set it to bootloader mode automatically, prior to flashing firmware.
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
Note that this is a complete replacement for the firmware, so you won't be
using Bootmapper Client to change any keyboard settings, since not all the
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
```
-In order to use the `./program` script, which can reboot the board into
+In order to use the `././util/atmega32a_program.py` script, which can reboot the board into
the bootloader, you'll need Python 2 with PyUSB installed:
```