[Keyboard] Move Keebio boards to own folder (#5109)

[qmk_firmware.git] / keyboards / iris / keymaps / fate / readme.md

diff --git a/keyboards/iris/keymaps/fate/readme.md b/keyboards/iris/keymaps/fate/readme.md
deleted file mode 100644 (file)
index 70f464b..0000000
--- a/keyboards/iris/keymaps/fate/readme.md
+++ /dev/null
@@ -1,23 +0,0 @@
-# Fate Iris Layout
-
-This keymap is configured for Pro Micro(s) with QMK-DFU bootloader flashed. Please refer to [this guide](https://www.reddit.com/r/olkb/comments/8sxgzb/replace_pro_micro_bootloader_with_qmk_dfu/) for further details on ISP flashing your Pro Micro.
-
-To generate a production-ready .hex file (containing the application and the bootloader), use the production target
-
-    make iris/rev2:fate:production
-
-To replace your Pro Micro with QMK-DFU bootloader along with the keymap, setup your ISP Flasher and avrdude, run (This command assumes you're using SparkFun's Pocket AVR Programmer to program):
-
-    $ avrdude -p m32u4 -P usb -c usbtiny -U flash:w:"iris_rev2_fate_production.hex" -U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m -U lock:w:0x3F:m -v
-
-Command to replace your Pro Micro with QMK-DFU bootloader only:
-
-    $ avrdude -p m32u4 -P usb -c usbtiny -U flash:w:"iris_rev2_fate_bootloader.hex" -U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m -U lock:w:0x3F:m -v
-
-The QMK_ESC is mapped to the ESC key in keymap.c; QMK_LED is mapped to TX_LED on the Pro Micro.
-
-    /* QMK DFU configuration */
-    #define QMK_ESC_OUTPUT F6
-    #define QMK_ESC_INPUT D7
-    #define QMK_LED     D5
-    #define QMK_SPEAKER C6