#include "config_common.h"
+#define USB_VENDOR_ID_LENOVO 0x17ef
+#define USB_DEVICE_ID_LENOVO_TPKBD 0x6009
+#define USB_DEVICE_ID_LENOVO_CUSBKBD 0x6047
+#define USB_DEVICE_ID_LENOVO_CBTKBD 0x6048
+#define USB_DEVICE_ID_LENOVO_TPPRODOCK 0x6067
+
/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6660
+#define VENDOR_ID USB_VENDOR_ID_LENOVO
+#define PRODUCT_ID USB_DEVICE_ID_LENOVO_CBTKBD
#define DEVICE_VER 0x0001
#define MANUFACTURER Priyadi
#define PRODUCT Promethium Keyboard
-#define DESCRIPTION Promethium Keyboard
+#define DESCRIPTION
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_ROW_PINS { D7, C6, D0, D1, F5, F4, F1, F0 }
#define UNUSED_PINS
-/* COL2ROW or ROW2COL */
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
#define DIODE_DIRECTION COL2ROW
-/* define if matrix has ghost */
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
+// #define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
+// #define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) \
)
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
-//#define NO_DEBUG
+// #define NO_DEBUG
/* disable print */
-//#define NO_PRINT
+// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
+#define PS2_INIT_DELAY 2000
+#define BATTERY_PIN 9
+#define BATTERY_POLL 30000
+#define MAX_VOLTAGE 4.2
+#define MIN_VOLTAGE 3.2
+
+#define KEYMAP( \
+ k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
+ k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+ k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
+ k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c \
+) \
+{ \
+ {k11, k12, k13, k14, k15, k16}, \
+ {k21, k22, k23, k24, k25, k26}, \
+ {k31, k32, k33, k34, k35, k36}, \
+ {k41, k42, k43, k44, k45, k46}, \
+ {k17, k18, k19, k1a, k1b, k1c}, \
+ {k27, k28, k29, k2a, k2b, k2c}, \
+ {k37, k38, k39, k3a, k3b, k3c}, \
+ {k47, k48, k49, k4a, k4b, k4c} \
+}
+
+#ifndef __ASSEMBLER__ // assembler doesn't like enum in .h file
+enum led_sequence {
+ LED_IND_BLUETOOTH,
+ LED_IND_USB,
+ LED_IND_BATTERY,
+
+ LED_IND_FUN,
+ LED_IND_NUM,
+ LED_IND_EMOJI,
+
+ LED_BKSP,
+ LED_ENT,
+ LED_RSFT,
+ LED_RCTL,
+
+ LED_RGUI,
+ LED_SLSH,
+ LED_SCLN,
+ LED_P,
+
+ LED_O,
+ LED_L,
+ LED_DOT,
+ LED_RALT,
+
+ LED_EMOJI,
+ LED_COMM,
+ LED_K,
+ LED_I,
+
+ LED_U,
+ LED_J,
+ LED_M,
+ LED_FUN,
+
+ LED_RSPC,
+ LED_N,
+ LED_HH,
+ LED_Y,
+
+ LED_TRACKPOINT3,
+ LED_TRACKPOINT2,
+ LED_TRACKPOINT1,
+
+ LED_LSPC,
+ LED_B,
+ LED_G,
+ LED_T,
+
+ LED_R,
+ LED_F,
+ LED_V,
+ LED_NUM,
+
+ LED_PUNC,
+ LED_C,
+ LED_D,
+ LED_E,
+
+ LED_W,
+ LED_S,
+ LED_X,
+ LED_LALT,
+
+ LED_LGUI,
+ LED_Z,
+ LED_A,
+ LED_Q,
+
+ LED_TAB,
+ LED_ESC,
+ LED_LSFT,
+ LED_LCTL,
+
+ LED_TOTAL
+};
+
+#define RGB_DI_PIN B5
+#define RGBSPS_NUM LED_TOTAL
+#endif
+
/* PS/2 mouse */
#ifdef PS2_USE_BUSYWAIT
# define PS2_CLOCK_PORT PORTD
projects / qmk_firmware.git / blobdiff