add QMK DFU make option to gherkin, and bootloader replacement instructions (#3253)

[qmk_firmware.git] / keyboards / gherkin / keymaps / wanleg / config.h

diff --git a/keyboards/gherkin/keymaps/wanleg/config.h b/keyboards/gherkin/keymaps/wanleg/config.h
index 84af739b27d1b294e76cefa6bbf6836dc33ee4ec..98e2b2338009e275cd3bf265b1ec84045ba85a45 100644 (file)
--- a/keyboards/gherkin/keymaps/wanleg/config.h
+++ b/keyboards/gherkin/keymaps/wanleg/config.h
@@ -1,68 +1,24 @@
-#ifndef CONFIG_H
-#define CONFIG_H
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
 
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    40 Percent Club
-#define PRODUCT         Gherkin
-#define DESCRIPTION     A 30 key ortholinear keyboard
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 6
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
-#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* number of backlight levels */
-#define BACKLIGHT_PIN B5
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 3
+#include "../../config.h"
 #endif
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* prevent stuck modifiers */
 #define PREVENT_STUCK_MODIFIERS
 
-/*tap dance definition */
+//Tap Dance Prerequisite
 #define TAPPING_TERM 200
 
 //Mousekeys Settings
-#define MOUSEKEY_INTERVAL 1
+#define MOUSEKEY_INTERVAL 16
 #define MOUSEKEY_DELAY 0
-#define MOUSEKEY_TIME_TO_MAX 1
-#define MOUSEKEY_MAX_SPEED 15
+#define MOUSEKEY_TIME_TO_MAX 60
+#define MOUSEKEY_MAX_SPEED 7
 #define MOUSEKEY_WHEEL_DELAY 0
 
-
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 0
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
-
-#endif
+/* for QMK DFU bootloader */
+/* not required if using default ProMicro bootloader */
+/* set top left key as bootloader mode escape key */
+#define QMK_ESC_OUTPUT B4 // usually COL
+#define QMK_ESC_INPUT F7 // usually ROW
+#define QMK_LED B0
\ No newline at end of file