#include QMK_KEYBOARD_H
-#include "i2cmaster.h"
-
extern inline void ergodox_board_led_on(void);
extern inline void ergodox_right_led_1_on(void);
extern inline void ergodox_led_all_set(uint8_t n);
-
bool i2c_initialized = 0;
-uint8_t mcp23018_status = 0x20;
+i2c_status_t mcp23018_status = 0x20;
void matrix_init_kb(void) {
// keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
PORTB &= ~(1<<4); // set B(4) internal pull-up disabled
// unused pins - C7, D4, D5, D7, E6
- // set as input with internal pull-ip enabled
+ // set as input with internal pull-up enabled
DDRC &= ~(1<<7);
DDRD &= ~(1<<5 | 1<<4);
DDRE &= ~(1<<6);
void ergodox_blink_all_leds(void)
{
ergodox_led_all_off();
- ergodox_led_all_set(LED_BRIGHTNESS_HI);
+ ergodox_led_all_set(LED_BRIGHTNESS_DEFAULT);
ergodox_right_led_1_on();
_delay_ms(50);
ergodox_right_led_2_on();
mcp23018_status = ergodox_left_leds_update();
}
#endif
-
+
//ergodox_led_all_on();
//_delay_ms(333);
ergodox_led_all_off();
// uint8_t sreg_prev;
// sreg_prev=SREG;
// cli();
+
if (i2c_initialized == 0) {
i2c_init(); // on pins D(1,0)
i2c_initialized = true;
_delay_ms(1000);
}
+ // i2c_init(); // on pins D(1,0)
+ // _delay_ms(1000);
// set pin direction
// - unused : input : 1
// - input : input : 1
// - driving : output : 0
- mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(IODIRA); if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_write(0b00111111, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
i2c_stop();
// set pull-up
// - unused : on : 1
// - input : on : 1
// - driving : off : 0
- mcp23018_status = i2c_start(I2C_ADDR_WRITE); if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(GPPUA); if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(0b00000000); if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(0b00111111); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_write(0b00111111, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
out:
i2c_stop();
// - unused : hi-Z : 1
// - input : hi-Z : 1
// - driving : hi-Z : 1
- mcp23018_status = i2c_start(I2C_ADDR_WRITE);
+ mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);
if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(OLATA);
+ mcp23018_status = i2c_write(OLATA, ERGODOX_EZ_I2C_TIMEOUT);
if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b11111111
- & ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT)
- );
+ & ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT),
+ ERGODOX_EZ_I2C_TIMEOUT);
if (mcp23018_status) goto out;
mcp23018_status = i2c_write(0b11111111
& ~(ergodox_left_led_2<<LEFT_LED_2_SHIFT)
- & ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT)
- );
+ & ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT),
+ ERGODOX_EZ_I2C_TIMEOUT);
if (mcp23018_status) goto out;
out:
#endif
-#ifdef ONEHAND_ENABLE
+#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
// swap-hands action needs a matrix to define the swap
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
};
#endif
+
+#ifdef RGB_MATRIX_ENABLE
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, C3_1, C2_1, C4_1}, // LED1 on right
+ {0, C6_1, C5_1, C7_1}, // LED2
+ {0, C4_2, C3_2, C5_2}, // LED3
+ {0, C7_2, C6_2, C8_2}, // LED4
+ {0, C2_3, C1_3, C3_3}, // LED5
+ {0, C5_3, C4_3, C6_3}, // LED6
+ {0, C8_3, C7_3, C9_3}, // LED7
+ {0, C2_4, C1_4, C3_4}, // LED8
+ {0, C6_4, C5_4, C7_4}, // LED9
+ {0, C2_5, C1_5, C3_5}, // LED10
+ {0, C7_5, C6_5, C8_5}, // LED11
+ {0, C2_6, C1_6, C3_6}, // LED12
+ {0, C5_6, C4_6, C6_6}, // LED13
+ {0, C8_6, C7_6, C9_6}, // LED14
+ {0, C2_7, C1_7, C3_7}, // LED15
+ {0, C5_7, C4_7, C6_7}, // LED16
+ {0, C2_8, C1_8, C3_8}, // LED17
+ {0, C5_8, C4_8, C6_8}, // LED18
+
+ {0, C3_9, C2_9, C4_9}, // LED19
+ {0, C6_9, C5_9, C7_9}, // LED20
+ {0, C4_10, C3_10, C5_10}, // LED21
+ {0, C7_10, C6_10, C8_10}, // LED22
+ {0, C2_11, C1_11, C3_11}, // LED23
+ {0, C5_11, C4_11, C6_11}, // LED24
+
+ {1, C3_1, C2_1, C4_1}, // LED1 on left
+ {1, C6_1, C5_1, C7_1}, // LED2
+ {1, C4_2, C3_2, C5_2}, // LED3
+ {1, C7_2, C6_2, C8_2}, // LED4
+ {1, C2_3, C1_3, C3_3}, // LED5
+ {1, C5_3, C4_3, C6_3}, // LED6
+ {1, C8_3, C7_3, C9_3}, // LED7
+ {1, C2_4, C1_4, C3_4}, // LED8
+ {1, C6_4, C5_4, C7_4}, // LED9
+ {1, C2_5, C1_5, C3_5}, // LED10
+ {1, C7_5, C6_5, C8_5}, // LED11
+ {1, C2_6, C1_6, C3_6}, // LED12
+ {1, C5_6, C4_6, C6_6}, // LED13
+ {1, C8_6, C7_6, C9_6}, // LED14
+ {1, C2_7, C1_7, C3_7}, // LED15
+ {1, C5_7, C4_7, C6_7}, // LED16
+ {1, C2_8, C1_8, C3_8}, // LED17
+ {1, C5_8, C4_8, C6_8}, // LED18
+
+ {1, C3_9, C2_9, C4_9}, // LED19
+ {1, C6_9, C5_9, C7_9}, // LED20
+ {1, C4_10, C3_10, C5_10}, // LED21
+ {1, C7_10, C6_10, C8_10}, // LED22
+ {1, C2_11, C1_11, C3_11}, // LED23
+ {1, C5_11, C4_11, C6_11} // LED24
+};
+
+
+led_config_t g_led_config = { {
+ { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+ { 28, 33, 38, 43, 47, NO_LED },
+ { 27, 32, 37, 42, 46, NO_LED },
+ { 26, 31, 36, 41, 45, NO_LED },
+ { 25, 30, 35, 40, 44, NO_LED },
+ { 24, 29, 34, 39, NO_LED, NO_LED },
+ { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+ { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
+ { 0, 5, 10, 15, NO_LED, NO_LED },
+ { 1, 6, 11, 16, 20, NO_LED },
+ { 2, 7, 12, 17, 21, NO_LED },
+ { 3, 8, 13, 18, 22, NO_LED },
+ { 4, 9, 14, 19, 23, NO_LED },
+ { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
+}, {
+ { 137, 0 }, { 154, 0 }, { 172, 0 }, { 189, 0 }, { 206, 0 }, { 137, 12 },
+ { 154, 12 }, { 172, 12 }, { 189, 12 }, { 206, 12 }, { 137, 25 }, { 154, 25 },
+ { 172, 25 }, { 189, 25 }, { 206, 25 }, { 137, 38 }, { 154, 38 }, { 172, 38 },
+ { 189, 38 }, { 206, 38 }, { 154, 51 }, { 172, 51 }, { 189, 51 }, { 206, 51 },
+ { 86, 0 }, { 68, 0 }, { 51, 0 }, { 34, 0 }, { 17, 0 }, { 86, 12 },
+ { 68, 12 }, { 51, 12 }, { 34, 12 }, { 17, 12 }, { 86, 25 }, { 68, 25 },
+ { 51, 25 }, { 34, 25 }, { 17, 25 }, { 86, 38 }, { 68, 38 }, { 51, 38 },
+ { 34, 38 }, { 17, 38 }, { 68, 51 }, { 51, 51 }, { 34, 51 }, { 17, 51 }
+}, {
+ 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4,
+ 4, 4, 1, 1, 1, 1,
+ 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4,
+ 4, 4, 1, 1, 1, 1
+} };
+
+#endif
projects / qmk_firmware.git / blobdiff