RGB Matrix Overhaul (#5372)

[qmk_firmware.git] / keyboards / ergodox_ez / config.h

diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h
index 6a391ffb541977ff07993ae63dbe9ab233e7535b..a75edd415440d1c408ee3a8bc505971617479708 100644 (file)
--- a/keyboards/ergodox_ez/config.h
+++ b/keyboards/ergodox_ez/config.h
@@ -16,8 +16,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#ifndef ERGODOX_EZ_CONFIG_H
+#define ERGODOX_EZ_CONFIG_H
 
 #include "config_common.h"
 
@@ -27,33 +27,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    ErgoDox EZ
 #define PRODUCT         ErgoDox EZ
-#define DESCRIPTION     t.m.k. keyboard firmware for Ergodox
+#define DESCRIPTION     QMK keyboard firmware for Ergodox EZ
 
 /* key matrix size */
 #define MATRIX_ROWS 14
+#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
 #define MATRIX_COLS 6
 
-#define MOUSEKEY_DELAY          100
 #define MOUSEKEY_INTERVAL       20
-#define MOUSEKEY_MAX_SPEED      3
-#define MOUSEKEY_TIME_TO_MAX    10
+#define MOUSEKEY_DELAY          0
+#define MOUSEKEY_TIME_TO_MAX    60
+#define MOUSEKEY_MAX_SPEED      7
+#define MOUSEKEY_WHEEL_DELAY 0
 
 #define TAPPING_TOGGLE  1
 
-#define COLS (int []){ F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
-#define ROWS (int []){ D0, D5, B5, B6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
-/* number of backlight levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    2
 #define TAPPING_TERM    200
 #define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
 
@@ -64,10 +55,70 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key combination for command */
 #define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
+    get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
+    get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
 )
 
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+#ifndef LED_BRIGHTNESS_LO
+#define LED_BRIGHTNESS_LO       15
+#endif
+#ifndef LED_BRIGHTNESS_HI
+#define LED_BRIGHTNESS_HI       255
+#endif
+#define LED_BRIGHTNESS_DEFAULT (LED_BRIGHTNESS_HI)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 15     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 255
+#define RGBLIGHT_VAL_STEP 12
+
+/* fix space cadet rollover issue */
+#define DISABLE_SPACE_CADET_ROLLOVER
+
+#define RGBW_BB_TWI
+
+#define RGBW 1
+
+/*
+ * The debounce filtering reports a key/switch change directly,
+ * without any extra delay. After that the debounce logic will filter
+ * all further changes, until the key/switch reports the same state for
+ * the given count of scans.
+ * So a perfect switch will get a short debounce period and
+ * a bad key will get a much longer debounce period.
+ * The result is an adaptive debouncing period for each switch.
+ *
+ * If you don't define it here, the matrix code will default to
+ * 5, which is now closer to 10ms, but still plenty according to
+ * manufacturer specs.
+ */
+#define DEBOUNCE    10
+
+#define USB_MAX_POWER_CONSUMPTION 500
+
+// RGB backlight
+#define DRIVER_ADDR_1 0b1110100
+#define DRIVER_ADDR_2 0b1110111
+#define DRIVER_COUNT 2
+#define DRIVER_1_LED_TOTAL 24
+#define DRIVER_2_LED_TOTAL 24
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL
+
+// #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF
+/* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */
+/* #define RGBLIGHT_COLOR_LAYER_2 0xFF, 0x00, 0x00 */
+/* #define RGBLIGHT_COLOR_LAYER_3 0x00, 0xFF, 0x00 */
+/* #define RGBLIGHT_COLOR_LAYER_4 0xFF, 0xFF, 0x00 */
+/* #define RGBLIGHT_COLOR_LAYER_5 0x00, 0xFF, 0xFF */
+/* #define RGBLIGHT_COLOR_LAYER_6 0xFF, 0x00, 0xFF */
+/* #define RGBLIGHT_COLOR_LAYER_7 0xFF, 0xFF, 0xFF */
+
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.