Clueboard 60% support (#1746)

[qmk_firmware.git] / keyboards / clueboard / rev3 / rev3.c

diff --git a/keyboards/clueboard/rev3/rev3.c b/keyboards/clueboard/rev3/rev3.c
deleted file mode 100644 (file)
index 8f703d2..0000000
--- a/keyboards/clueboard/rev3/rev3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-#include "rev3.h"
-#include <avr/io.h>
-#include "backlight.h"
-#include "print.h"
-
-void matrix_init_kb(void) {
-       // put your keyboard start-up code here
-       // runs once when the firmware starts up
-       matrix_init_user();
-       led_init_ports();
-
-    // JTAG disable for PORT F. write JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-}
-
-
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-void backlight_init_ports(void) {
-    print("init_backlight_pin()\n");
-    // Set our LED pins as output
-    DDRD |= (1<<6); // Esc
-    DDRB |= (1<<7); // Page Up
-    DDRD |= (1<<4); // Arrows
-
-    // Set our LED pins low
-    PORTD &= ~(1<<6); // Esc
-    PORTB &= ~(1<<7); // Page Up
-    PORTD &= ~(1<<4); // Arrows
-}
-
-void backlight_set(uint8_t level) {
-    if ( level == 0 ) {
-        // Turn off light
-        PORTD |= (1<<6); // Esc
-        PORTB |= (1<<7); // Page Up
-        PORTD |= (1<<4); // Arrows
-    } else {
-        // Turn on light
-        PORTD &= ~(1<<6); // Esc
-        PORTB &= ~(1<<7); // Page Up
-        PORTD &= ~(1<<4); // Arrows
-    }
-}
-
-void led_init_ports() {
-    // * Set our LED pins as output
-    DDRB |= (1<<4);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRB |= (1<<4);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTB |= (1<<4);
-    } else {
-        // Turn capslock off
-        PORTB &= ~(1<<4);
-    }
-}