[Keyboard] Snagpad Configurator bugfix and readme refactor (#6381)

[qmk_firmware.git] / keyboards / chibios_test / teensy_lc_onekey / mcuconf.h

diff --git a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
index c636590197be92908698e8375b3c316817acaeb6..2764e88989c1889ad18956b1469f50c1aa0bb9f4 100644 (file)
--- a/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
+++ b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
@@ -1,55 +1,55 @@
-/*\r
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
-    Licensed under the Apache License, Version 2.0 (the "License");\r
-    you may not use this file except in compliance with the License.\r
-    You may obtain a copy of the License at\r
-\r
-        http://www.apache.org/licenses/LICENSE-2.0\r
-\r
-    Unless required by applicable law or agreed to in writing, software\r
-    distributed under the License is distributed on an "AS IS" BASIS,\r
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
-    See the License for the specific language governing permissions and\r
-    limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-#define KL2x_MCUCONF\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-#if 1\r
-/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */\r
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE\r
-#define KINETIS_PLLCLK_FREQUENCY    96000000UL\r
-#define KINETIS_SYSCLK_FREQUENCY    48000000UL\r
-#endif\r
-\r
-#if 0\r
-/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */\r
-#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI\r
-#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */\r
-#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */\r
-#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */\r
-#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */\r
-#endif\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define KINETIS_SERIAL_USE_UART0              TRUE\r
-\r
-/*\r
- * USB driver settings\r
- */\r
-#define KINETIS_USB_USE_USB0                  TRUE\r
-/* Need to redefine this, since the default is for K20x */\r
-/* This is for Teensy LC; you should comment it out (or change to 5)\r
- * for Teensy 3.x */\r
-#define KINETIS_USB_USB0_IRQ_PRIORITY         2\r
-\r
-#endif /* _MCUCONF_H_ */\r
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#if 1
+/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_PLLCLK_FREQUENCY    96000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+#endif
+
+#if 0
+/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#define KINETIS_CLKDIV1_OUTDIV1     1           /* do not divide system clock */
+#endif
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * USB driver settings
+ */
+#define KINETIS_USB_USE_USB0                  TRUE
+/* Need to redefine this, since the default is for K20x */
+/* This is for Teensy LC; you should comment it out (or change to 5)
+ * for Teensy 3.x */
+#define KINETIS_USB_USB0_IRQ_PRIORITY         2
+
+#endif /* _MCUCONF_H_ */