-/*\r
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
- Licensed under the Apache License, Version 2.0 (the "License");\r
- you may not use this file except in compliance with the License.\r
- You may obtain a copy of the License at\r
-\r
- http://www.apache.org/licenses/LICENSE-2.0\r
-\r
- Unless required by applicable law or agreed to in writing, software\r
- distributed under the License is distributed on an "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
- See the License for the specific language governing permissions and\r
- limitations under the License.\r
-*/\r
-\r
-#ifndef _MCUCONF_H_\r
-#define _MCUCONF_H_\r
-\r
-/*\r
- * STM32F0xx drivers configuration.\r
- * The following settings override the default settings present in\r
- * the various device driver implementation headers.\r
- * Note that the settings for each driver only have effect if the whole\r
- * driver is enabled in halconf.h.\r
- *\r
- * IRQ priorities:\r
- * 3...0 Lowest...Highest.\r
- *\r
- * DMA priorities:\r
- * 0...3 Lowest...Highest.\r
- */\r
-\r
-#define STM32F0xx_MCUCONF\r
-\r
-/*\r
- * HAL driver system settings.\r
- */\r
-#define STM32_NO_INIT FALSE\r
-#define STM32_PVD_ENABLE FALSE\r
-#define STM32_PLS STM32_PLS_LEV0\r
-#define STM32_HSI_ENABLED TRUE\r
-#define STM32_HSI14_ENABLED TRUE\r
-#define STM32_HSI48_ENABLED FALSE\r
-#define STM32_LSI_ENABLED TRUE\r
-#define STM32_HSE_ENABLED FALSE\r
-#define STM32_LSE_ENABLED FALSE\r
-#define STM32_SW STM32_SW_PLL\r
-#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2\r
-#define STM32_PREDIV_VALUE 1\r
-#define STM32_PLLMUL_VALUE 12\r
-#define STM32_HPRE STM32_HPRE_DIV1\r
-#define STM32_PPRE STM32_PPRE_DIV1\r
-#define STM32_ADCSW STM32_ADCSW_HSI14\r
-#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
-#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK\r
-#define STM32_ADCPRE STM32_ADCPRE_DIV4\r
-#define STM32_ADCSW STM32_ADCSW_HSI14\r
-#define STM32_USBSW STM32_USBSW_HSI48\r
-#define STM32_CECSW STM32_CECSW_HSI\r
-#define STM32_I2C1SW STM32_I2C1SW_HSI\r
-#define STM32_USART1SW STM32_USART1SW_PCLK\r
-#define STM32_RTCSEL STM32_RTCSEL_LSI\r
-\r
-/*\r
- * ADC driver system settings.\r
- */\r
-#define STM32_ADC_USE_ADC1 FALSE\r
-#define STM32_ADC_ADC1_DMA_PRIORITY 2\r
-#define STM32_ADC_IRQ_PRIORITY 2\r
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2\r
-\r
-/*\r
- * EXT driver system settings.\r
- */\r
-#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI16_IRQ_PRIORITY 3\r
-#define STM32_EXT_EXTI17_IRQ_PRIORITY 3\r
-\r
-/*\r
- * GPT driver system settings.\r
- */\r
-#define STM32_GPT_USE_TIM1 FALSE\r
-#define STM32_GPT_USE_TIM2 FALSE\r
-#define STM32_GPT_USE_TIM3 FALSE\r
-#define STM32_GPT_USE_TIM14 FALSE\r
-#define STM32_GPT_TIM1_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM2_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM3_IRQ_PRIORITY 2\r
-#define STM32_GPT_TIM14_IRQ_PRIORITY 2\r
-\r
-/*\r
- * I2C driver system settings.\r
- */\r
-#define STM32_I2C_USE_I2C1 FALSE\r
-#define STM32_I2C_USE_I2C2 FALSE\r
-#define STM32_I2C_BUSY_TIMEOUT 50\r
-#define STM32_I2C_I2C1_IRQ_PRIORITY 3\r
-#define STM32_I2C_I2C2_IRQ_PRIORITY 3\r
-#define STM32_I2C_USE_DMA TRUE\r
-#define STM32_I2C_I2C1_DMA_PRIORITY 1\r
-#define STM32_I2C_I2C2_DMA_PRIORITY 1\r
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ICU driver system settings.\r
- */\r
-#define STM32_ICU_USE_TIM1 FALSE\r
-#define STM32_ICU_USE_TIM2 FALSE\r
-#define STM32_ICU_USE_TIM3 FALSE\r
-#define STM32_ICU_TIM1_IRQ_PRIORITY 3\r
-#define STM32_ICU_TIM2_IRQ_PRIORITY 3\r
-#define STM32_ICU_TIM3_IRQ_PRIORITY 3\r
-\r
-/*\r
- * PWM driver system settings.\r
- */\r
-#define STM32_PWM_USE_ADVANCED FALSE\r
-#define STM32_PWM_USE_TIM1 FALSE\r
-#define STM32_PWM_USE_TIM2 FALSE\r
-#define STM32_PWM_USE_TIM3 FALSE\r
-#define STM32_PWM_TIM1_IRQ_PRIORITY 3\r
-#define STM32_PWM_TIM2_IRQ_PRIORITY 3\r
-#define STM32_PWM_TIM3_IRQ_PRIORITY 3\r
-\r
-/*\r
- * SERIAL driver system settings.\r
- */\r
-#define STM32_SERIAL_USE_USART1 FALSE\r
-#define STM32_SERIAL_USE_USART2 FALSE\r
-#define STM32_SERIAL_USART1_PRIORITY 3\r
-#define STM32_SERIAL_USART2_PRIORITY 3\r
-\r
-/*\r
- * SPI driver system settings.\r
- */\r
-#define STM32_SPI_USE_SPI1 FALSE\r
-#define STM32_SPI_USE_SPI2 FALSE\r
-#define STM32_SPI_SPI1_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI2_DMA_PRIORITY 1\r
-#define STM32_SPI_SPI1_IRQ_PRIORITY 2\r
-#define STM32_SPI_SPI2_IRQ_PRIORITY 2\r
-#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * ST driver system settings.\r
- */\r
-#define STM32_ST_IRQ_PRIORITY 2\r
-#define STM32_ST_USE_TIMER 2\r
-\r
-/*\r
- * UART driver system settings.\r
- */\r
-#define STM32_UART_USE_USART1 FALSE\r
-#define STM32_UART_USE_USART2 FALSE\r
-#define STM32_UART_USART1_IRQ_PRIORITY 3\r
-#define STM32_UART_USART2_IRQ_PRIORITY 3\r
-#define STM32_UART_USART1_DMA_PRIORITY 0\r
-#define STM32_UART_USART2_DMA_PRIORITY 0\r
-#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")\r
-\r
-/*\r
- * USB driver system settings.\r
- */\r
-#define STM32_USB_USE_USB1 TRUE\r
-#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE\r
-#define STM32_USB_USB1_LP_IRQ_PRIORITY 3\r
-\r
-#endif /* _MCUCONF_H_ */\r
+/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0 Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3 Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT FALSE
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_HSI_ENABLED TRUE
+#define STM32_HSI14_ENABLED TRUE
+#define STM32_HSI48_ENABLED FALSE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED FALSE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE 1
+#define STM32_PLLMUL_VALUE 12
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE STM32_PPRE_DIV1
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#define STM32_USBSW STM32_USBSW_HSI48
+#define STM32_CECSW STM32_CECSW_HSI
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1 FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#define STM32_ADC_IRQ_PRIORITY 2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1 FALSE
+#define STM32_GPT_USE_TIM2 FALSE
+#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM14 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY 2
+#define STM32_GPT_TIM2_IRQ_PRIORITY 2
+#define STM32_GPT_TIM3_IRQ_PRIORITY 2
+#define STM32_GPT_TIM14_IRQ_PRIORITY 2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
+#define STM32_I2C_I2C1_IRQ_PRIORITY 3
+#define STM32_I2C_I2C2_IRQ_PRIORITY 3
+#define STM32_I2C_USE_DMA TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1 FALSE
+#define STM32_ICU_USE_TIM2 FALSE
+#define STM32_ICU_USE_TIM3 FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY 3
+#define STM32_ICU_TIM2_IRQ_PRIORITY 3
+#define STM32_ICU_TIM3_IRQ_PRIORITY 3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED FALSE
+#define STM32_PWM_USE_TIM1 FALSE
+#define STM32_PWM_USE_TIM2 FALSE
+#define STM32_PWM_USE_TIM3 FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY 3
+#define STM32_PWM_TIM2_IRQ_PRIORITY 3
+#define STM32_PWM_TIM3_IRQ_PRIORITY 3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1 FALSE
+#define STM32_SERIAL_USE_USART2 FALSE
+#define STM32_SERIAL_USART1_PRIORITY 3
+#define STM32_SERIAL_USART2_PRIORITY 3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1 FALSE
+#define STM32_SPI_USE_SPI2 FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY 1
+#define STM32_SPI_SPI2_DMA_PRIORITY 1
+#define STM32_SPI_SPI1_IRQ_PRIORITY 2
+#define STM32_SPI_SPI2_IRQ_PRIORITY 2
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 2
+#define STM32_ST_USE_TIMER 2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1 FALSE
+#define STM32_UART_USE_USART2 FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY 3
+#define STM32_UART_USART2_IRQ_PRIORITY 3
+#define STM32_UART_USART1_DMA_PRIORITY 0
+#define STM32_UART_USART2_DMA_PRIORITY 0
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1 TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
+
+#endif /* _MCUCONF_H_ */
projects / qmk_firmware.git / blobdiff