Add user-overridable callback for cancelling UCIS input (#5564)

[qmk_firmware.git] / keyboards / chibios_test / boards / GENERIC_STM32_F103 / board.c

diff --git a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
index 31319ef57528338e51c6749ef46e88e73ad6bf9e..2809c9d184ed1a982dff98a14577cc9f70302d48 100644 (file)
--- a/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
+++ b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
@@ -1,49 +1,49 @@
-/*\r
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio\r
-\r
-    Licensed under the Apache License, Version 2.0 (the "License");\r
-    you may not use this file except in compliance with the License.\r
-    You may obtain a copy of the License at\r
-\r
-        http://www.apache.org/licenses/LICENSE-2.0\r
-\r
-    Unless required by applicable law or agreed to in writing, software\r
-    distributed under the License is distributed on an "AS IS" BASIS,\r
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
-    See the License for the specific language governing permissions and\r
-    limitations under the License.\r
-*/\r
-\r
-#include "hal.h"\r
-\r
-/**\r
- * @brief   PAL setup.\r
- * @details Digital I/O ports static configuration as defined in @p board.h.\r
- *          This variable is used by the HAL when initializing the PAL driver.\r
- */\r
-#if HAL_USE_PAL || defined(__DOXYGEN__)\r
-const PALConfig pal_default_config =\r
-{\r
-  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},\r
-  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},\r
-  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},\r
-  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},\r
-  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},\r
-};\r
-#endif\r
-\r
-/*\r
- * Early initialization code.\r
- * This initialization must be performed just after stack setup and before\r
- * any other initialization.\r
- */\r
-void __early_init(void) {\r
-\r
-  stm32_clock_init();\r
-}\r
-\r
-/*\r
- * Board-specific initialization code.\r
- */\r
-void boardInit(void) {\r
-}\r
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config =
+{
+  {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
+  {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
+  {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
+  {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
+  {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  stm32_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+}