Remove more commented out MCUs

[qmk_firmware.git] / keyboards / atreus / readme.md

diff --git a/keyboards/atreus/readme.md b/keyboards/atreus/readme.md
index 50901ee328a19dc18bfd4a65bd8dcad648d05c45..5cd797da96ff55475a9172b9aeef546fcd388474 100644 (file)
--- a/keyboards/atreus/readme.md
+++ b/keyboards/atreus/readme.md
@@ -1,21 +1,24 @@
 Atreus
-===
+======
 
 A small mechanical keyboard that is based around the shape of the human hand.
 
-These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2, (usually hand-wired) one powered by an A-Star. (usually using a PCB) This repository currently assumes that you have an A-Star powered Atreus. If you are using a Teensy2, specify that by adding `TEENSY2=yes` to your `make` commands.
-
 Keyboard Maintainer: [Phil Hagelberg](https://github.com/technomancy)  
 Hardware Supported: Atreus, PCB-based or hand-wired  
 Hardware Availability: https://atreus.technomancy.us
 
-Make example for this keyboard (after setting up your build environment):
+These configuration files are specifically for the Atreus keyboards created by Phil Hagelberg (@technomancy). This keyboard is available in two variants: one powered by a Teensy 2 (usually hand-wired), one powered by an A-Star (usually using a PCB). You will need to use different `make` commands depending on the variant you have; see examples below.
+
+A-Star:\
+`make atreus:default:avrdude`
 
-    make atreus:default:avrdude
+Teensy:\
+`make TEENSY2=yes atreus:default:teensy`
+ 
+If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands, e.g.
 
-Unlike the TMK firmware, this command should be run from the root of
-the repository, not the directory containing this readme.
+`make PCBDOWN=yes atreus:default:avrdude`
 
-If your keyboard layout is a mirror image of what you expected (i.e. you do not get QWERTY on the left but YTREWQ on the right), then you have an A-Star powered Atreus (older than March 2016) with PCB labels facing *down* instead of up. Specify that by adding `PCBDOWN=yes` to your `make` commands.
+*Unlike the TMK firmware, these commands should be run from the root of the repository, not the directory containing this readme.*
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools), then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.