adds backlight levels to the satan keyboard (#431)

[qmk_firmware.git] / keyboard / preonic / preonic.c

diff --git a/keyboard/preonic/preonic.c b/keyboard/preonic/preonic.c
index 211f8d029645ada6c32ae4079094a84e5d833e68..773451bf0c88bc27500191e15709a491c876af55 100644 (file)
--- a/keyboard/preonic/preonic.c
+++ b/keyboard/preonic/preonic.c
@@ -11,8 +11,8 @@ void matrix_scan_user(void) {
 };
 
 __attribute__ ((weak))
-void process_action_user(keyrecord_t *record) {
-
+bool process_action_user(keyrecord_t *record) {
+    return true;
 };
 
 void matrix_init_kb(void) {
@@ -20,11 +20,6 @@ void matrix_init_kb(void) {
        backlight_init_ports();
        #endif
 
-       #ifdef RGBLIGHT_ENABLE
-               rgblight_init();
-       #endif
-
-
     // Turn status LED on
     DDRE |= (1<<6);
     PORTE |= (1<<6);
@@ -36,8 +31,8 @@ void matrix_scan_kb(void) {
        matrix_scan_user();
 };
 
-void process_action_kb(keyrecord_t *record) {
-       process_action_user(record);
+bool process_action_kb(keyrecord_t *record) {
+       return process_action_user(record);
 }
 
 #ifdef BACKLIGHT_ENABLE
@@ -49,20 +44,20 @@ void backlight_init_ports()
     // Setup PB7 as output and output low.
     DDRB |= (1<<7);
     PORTB &= ~(1<<7);
-    
-    // Use full 16-bit resolution. 
+
+    // Use full 16-bit resolution.
     ICR1 = 0xFFFF;
 
     // I could write a wall of text here to explain... but TL;DW
     // Go read the ATmega32u4 datasheet.
     // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
-    
+
     // Pin PB7 = OCR1C (Timer 1, Channel C)
     // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
     // (i.e. start high, go low when counter matches.)
     // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
     // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
-    
+
     TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
     TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
 
@@ -88,7 +83,7 @@ void backlight_set(uint8_t level)
         // Set the brightness
         CHANNEL = 0xFFFF;
     }
-    else        
+    else
     {
         // Prevent backlight blink on lowest level
         PORTB &= ~(_BV(PORTB7));
@@ -99,4 +94,4 @@ void backlight_set(uint8_t level)
     }
 }
 
-#endif
\ No newline at end of file
+#endif