the spacessss

[qmk_firmware.git] / keyboard / planck / Makefile

diff --git a/keyboard/planck/Makefile b/keyboard/planck/Makefile
index e021e9e90bb73132979281f958173de6e8e5ef1d..8d4e7787a64b7089762dff7e5417d707bc790fb2 100644 (file)
--- a/keyboard/planck/Makefile
+++ b/keyboard/planck/Makefile
@@ -27,7 +27,7 @@
 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
 #                (must have Atmel FLIP installed).
 #
-# make debug = Start either simulavr or avarice as specified for debugging, 
+# make debug = Start either simulavr or avarice as specified for debugging,
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
@@ -39,45 +39,52 @@
 #----------------------------------------------------------------------------
 
 # Target file name (without extension).
-TARGET = planck_lufa
+TARGET = planck
 
 # Directory common source filess exist
 TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
 
-
-
 # # project specific files
-ifdef COMMON
+SRC = planck.c
 
-       SRC = keymap_common.c \
-       matrix_handwire.c \
-       led.c \
-       backlight.c
+ifdef keymap
+       KEYMAP = $(keymap)
+endif
 
 ifdef KEYMAP
-    SRC := common_keymaps/keymap_$(KEYMAP).c $(SRC)
+ifneq ("$(wildcard keymaps/$(KEYMAP).c)","")
+       KEYMAP_FILE = keymaps/$(KEYMAP).c
 else
-    SRC := common_keymaps/keymap_jack.c $(SRC)
+ifneq ("$(wildcard keymaps/$(KEYMAP)/keymap.c)","")
+       KEYMAP_FILE = keymaps/$(KEYMAP)/keymap.c
+ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","")
+       include keymaps/$(KEYMAP)/makefile.mk
 endif
-
 else
+$(error Keymap file does not exist)
+endif 
+endif
 
-SRC = extended_keymap_common.c \
-       matrix_handwire.c \
-       led.c \
-       backlight.c
+else
 
-ifdef KEYMAP
-    SRC := extended_keymaps/extended_keymap_$(KEYMAP).c $(SRC)
+ifneq ("$(wildcard keymaps/default.c)","")
+       KEYMAP_FILE = keymaps/default.c
 else
-    SRC := extended_keymaps/extended_keymap_jack.c $(SRC)
+       KEYMAP_FILE = keymaps/default/keymap.c
 endif
 
+ifneq ("$(wildcard keymaps/default/makefile.mk)","")
+       include keymaps/default/makefile.mk
 endif
 
+endif
+
+SRC := $(KEYMAP_FILE) $(SRC)
+
 CONFIG_H = config.h
 
 # MCU name
@@ -97,7 +104,6 @@ MCU = atmega32u4
 #     software delays.
 F_CPU = 16000000
 
-
 #
 # LUFA specific
 #
@@ -129,19 +135,45 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   USBaspLoader     2048
 OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
-
 # Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
-CONSOLE_ENABLE = yes   # Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
+#   change to "no" to disable the options, or define them in the makefile.mk in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes      # USB Nkey Rollover - not yet supported in LUFA
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+ifdef KEYMAP
+
+ifeq ("$(wildcard keymaps/$(KEYMAP).c)","")
+ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","")
+       include keymaps/$(KEYMAP)/makefile.mk
+endif 
+endif
+
+else
+
+ifneq ("$(wildcard keymaps/default/makefile.mk)","")
+       include keymaps/default/makefile.mk
+endif
+
+endif
+
+ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
+       SRC := backlight.c $(SRC)
+endif
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
@@ -149,7 +181,6 @@ BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
 # Search Path
 VPATH += $(TARGET_DIR)
 VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TOP_DIR)/quantum/quantum.mk