]> git.donarmstrong.com Git - qmk_firmware.git/blobdiff - keyboard/hbkb/Makefile
Add Makefile.lufa to keyboard/hhkb and hbkb.
[qmk_firmware.git] / keyboard / hbkb / Makefile
deleted file mode 100644 (file)
index 26be322e0155e9facd36c4b9086cf4694788c225..0000000000000000000000000000000000000000
+++ /dev/null
@@ -1,56 +0,0 @@
-# Target file name (without extension).
-TARGET = hbk
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# keyboard dependent files
-SRC =  main.c \
-       keymap.c \
-       matrix.c \
-       led.c
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
-#MCU = at90usb646       # Teensy++ 1.0
-#MCU = at90usb1286      # Teensy++ 2.0
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Build Options
-#   comment out to disable the options.
-#
-MOUSEKEY_ENABLE = yes  # Mouse keys
-#PS2_MOUSE_ENABLE = yes        # PS/2 mouse(TrackPoint) support
-EXTRAKEY_ENABLE = yes  # Audio control and System control
-#NKRO_ENABLE = yes     # USB Nkey Rollover
-
-
-
-#---------------- Programming Options --------------------------
-#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-PROGRAM_CMD = /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) erase && \
-             /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) flash $(TARGET).hex && \
-             /opt/dfu-programmer-0.5.2/bin/dfu-programmer $(MCU) start
-
-
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
new file mode 120000 (symlink)
index 0000000000000000000000000000000000000000..f00d036da3b3c37005cae5cfaa8489be117b92e7
--- /dev/null
@@ -0,0 +1 @@
+Makefile.lufa
\ No newline at end of file