cout << "The deconvolute command parameter is fasta and it is required." << "\n";
cout << "The deconvolute command should be in the following format: " << "\n";
cout << "deconvolute(fasta=yourFastaFile) " << "\n";
+ }else if (globaldata->helpRequest == "dist.seq") {
+ cout << "The dist.seq command reads a file containing sequences and creates a distance file." << "\n";
+ cout << "The dist.seq command parameters are fasta, phylip, clustal, nexus, calc, ends, cutoff and processors. " << "\n";
+ cout << "You must use one of the following parameters for your filename: fasta, phylip, clustal or nexus. " << "\n";
+ cout << "The calc parameter allows you to specify the method of calculating the distances. Your options are: nogaps, onegap or eachgap. The default is onegap." << "\n";
+ cout << "The ends parameter allows you to specify whether to include terminal gaps in distance. Your options are: T or F. The default is T." << "\n";
+ cout << "The cutoff parameter allows you to specify maximum distance to keep. The default is 1.0." << "\n";
+ cout << "The processors parameter allows you to specify number of processors to use. The default is 1, but you can use up to 4 processors." << "\n";
+ cout << "The dist.seq command should be in the following format: " << "\n";
+ cout << "dist.seq(fasta=yourFastaFile, calc=yourCalc, ends=yourEnds, cutoff= yourCutOff, processors=yourProcessors) " << "\n";
+ cout << "Example dist.seq(fasta=amazon.fasta, calc=eachgap, ends=F, cutoff= 2.0, processors=3)." << "\n";
+ cout << "Note: No spaces between parameter labels (i.e. calc), '=' and parameters (i.e.yourCalc)." << "\n" << "\n";
}else if (globaldata->helpRequest == "collect.single") {
cout << "The collect.single command can only be executed after a successful read.otu command. WITH ONE EXECEPTION. " << "\n";
cout << "The collect.single command can be executed after a successful cluster command. It will use the .list file from the output of the cluster." << "\n";
cout << "Note: No spaces between parameter labels (i.e. freq), '=' and parameters (i.e.yourFreq)." << "\n" << "\n";
}else if (globaldata->helpRequest == "collect.shared") {
cout << "The collect.shared command can only be executed after a successful read.otu command." << "\n";
- cout << "The collect.shared command parameters are label, line, freq, jumble, calc and groups. No parameters are required, but you may not use " << "\n";
+ cout << "The collect.shared command parameters are label, line, freq, calc and groups. No parameters are required, but you may not use " << "\n";
cout << "both the line and label parameters at the same time. The collect.shared command should be in the following format: " << "\n";
- cout << "collect.shared(label=yourLabel, line=yourLines, freq=yourFreq, jumble=yourJumble, calc=yourEstimators, groups=yourGroups)." << "\n";
- cout << "Example collect.shared(label=unique-.01-.03, line=0-5-10, freq=10, jumble=1, groups=B-C, calc=sharedchao-sharedace-jabund-sorensonabund-jclass-sorclass-jest-sorest-thetayc-thetan)." << "\n";
- cout << "The default values for jumble is 1 (meaning jumble, if it’s set to 0 then it will not jumble), freq is 100 and calc are sharedsobs-sharedchao-sharedace-jabund-sorensonabund-jclass-sorclass-jest-sorest-thetayc-thetan." << "\n";
+ cout << "collect.shared(label=yourLabel, line=yourLines, freq=yourFreq, calc=yourEstimators, groups=yourGroups)." << "\n";
+ cout << "Example collect.shared(label=unique-.01-.03, line=0-5-10, freq=10, groups=B-C, calc=sharedchao-sharedace-jabund-sorensonabund-jclass-sorclass-jest-sorest-thetayc-thetan)." << "\n";
+ cout << "The default values for freq is 100 and calc are sharedsobs-sharedchao-sharedace-jabund-sorensonabund-jclass-sorclass-jest-sorest-thetayc-thetan." << "\n";
cout << "The default value for groups is all the groups in your groupfile." << "\n";
validCalcs->printCalc("shared", cout);
cout << "The label and line parameters are used to analyze specific lines in your input." << "\n";
cout << "Note: No spaces between parameter labels (i.e. line), '=' and parameters (i.e.yourLines)." << "\n" << "\n";
}else if (globaldata->helpRequest == "summary.shared") {
cout << "The summary.shared command can only be executed after a successful read.otu command." << "\n";
- cout << "The summary.shared command parameters are label, line, jumble and calc. No parameters are required, but you may not use " << "\n";
+ cout << "The summary.shared command parameters are label, line and calc. No parameters are required, but you may not use " << "\n";
cout << "both the line and label parameters at the same time. The summary.shared command should be in the following format: " << "\n";
- cout << "summary.shared(label=yourLabel, line=yourLines, jumble=yourJumble, calc=yourEstimators, groups=yourGroups)." << "\n";
- cout << "Example summary.shared(label=unique-.01-.03, line=0,5,10, jumble=1, groups=B-C, calc=sharedchao-sharedace-jabund-sorensonabund-jclass-sorclass-jest-sorest-thetayc-thetan)." << "\n";
+ cout << "summary.shared(label=yourLabel, line=yourLines, calc=yourEstimators, groups=yourGroups)." << "\n";
+ cout << "Example summary.shared(label=unique-.01-.03, line=0,5,10, groups=B-C, calc=sharedchao-sharedace-jabund-sorensonabund-jclass-sorclass-jest-sorest-thetayc-thetan)." << "\n";
validCalcs->printCalc("sharedsummary", cout);
- cout << "The default value for jumble is 1 (meaning jumble, if it’s set to 0 then it will not jumble) and calc is sharedsobs-sharedchao-sharedace-jabund-sorensonabund-jclass-sorclass-jest-sorest-thetayc-thetan" << "\n";
+ cout << "The default value for calc is sharedsobs-sharedchao-sharedace-jabund-sorensonabund-jclass-sorclass-jest-sorest-thetayc-thetan" << "\n";
cout << "The default value for groups is all the groups in your groupfile." << "\n";
cout << "The label and line parameters are used to analyze specific lines in your input." << "\n";
cout << "The groups parameter allows you to specify which of the groups in your groupfile you would like analyzed. You must enter at least 2 valid groups." << "\n";
cout << "The groups parameter allows you to specify which of the groups in your groupfile you would like included used." << "\n";
cout << "The group names are separated by dashes. The line and label allow you to select what distance levels you would like trees created for, and are also separated by dashes." << "\n";
cout << "The tree.shared command should be in the following format: tree.shared(groups=yourGroups, calc=yourCalcs, line=yourLines, label=yourLabels)." << "\n";
- cout << "Example tree.shared(groups=A-B-C, line=1-3-5, calc=jabund-sorensonabund)." << "\n";
+ cout << "Example tree.shared(groups=A-B-C, line=1-3-5, calc=jabund-sorabund)." << "\n";
cout << "The default value for groups is all the groups in your groupfile." << "\n";
cout << "There is no default value for calc." << "\n";
validCalcs->printCalc("treegroup", cout);
cout << "The groups parameter allows you to specify which of the groups in your groupfile you would like included used." << "\n";
cout << "The group names are separated by dashes. The line and label allow you to select what distance levels you would like trees created for, and are also separated by dashes." << "\n";
cout << "The bootstrap.shared command should be in the following format: bootstrap.shared(groups=yourGroups, calc=yourCalcs, line=yourLines, label=yourLabels, iters=yourIters)." << "\n";
- cout << "Example bootstrap.shared(groups=A-B-C, line=1-3-5, calc=jabund-sorensonabund, iters=100)." << "\n";
+ cout << "Example bootstrap.shared(groups=A-B-C, line=1-3-5, calc=jabund-sorabund, iters=100)." << "\n";
cout << "The default value for groups is all the groups in your groupfile." << "\n";
cout << "There is no default value for calc. The default for iters is 1000." << "\n";
validCalcs->printCalc("boot", cout);
cout << "The bootstrap.shared command outputs a .tre file for each calculator you specify at each distance you choose containing iters number of trees." << "\n";
cout << "Note: No spaces between parameter labels (i.e. groups), '=' and parameters (i.e.yourGroups)." << "\n" << "\n";
+ }else if (globaldata->helpRequest == "concensus") {
+ cout << "The concensus command can only be executed after a successful read.tree command." << "\n";
+ cout << "The concensus command has no parameters." << "\n";
+ cout << "The concensus command should be in the following format: concensus()." << "\n";
+ cout << "The concensus command output two files: .concensus.tre and .concensuspairs." << "\n";
+ cout << "The .concensus.tre file contains the concensus tree of the trees in your input file." << "\n";
+ cout << "The branch lengths are the percentage of trees in your input file that had the given pair." << "\n";
+ cout << "The .concensuspairs file contains a list of the internal nodes in your tree. For each node, the pair that was used in the concensus tree " << "\n";
+ cout << "is reported with its percentage, as well as the other pairs that were seen for that node but not used and their percentages." << "\n" << "\n";
}else if (globaldata->helpRequest == "bin.seqs") {
cout << "The bin.seqs command can only be executed after a successful read.otu command of a list file." << "\n";
cout << "The bin.seqs command parameters are fasta, name, line and label. The fasta parameter is required, and you may not use line and label at the same time." << "\n";
projects / mothur.git / blobdiff