Rename i2c_slave functions so it can coexist with i2c_master (#4875)

[qmk_firmware.git] / drivers / avr / i2c_slave.c

diff --git a/drivers/avr/i2c_slave.c b/drivers/avr/i2c_slave.c
index 27696ca01ab5f99d28faea9c16d6b07654b4b77e..18a29a45a5a440433c6a7b8376c2ae4777734545 100755 (executable)
--- a/drivers/avr/i2c_slave.c
+++ b/drivers/avr/i2c_slave.c
@@ -9,23 +9,26 @@
 
 #include "i2c_slave.h"
 
-void i2c_init(uint8_t address){
+volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
+
+static volatile uint8_t buffer_address;
+static volatile bool slave_has_register_set = false;
+
+void i2c_slave_init(uint8_t address){
     // load address into TWI address register
     TWAR = (address << 1);
     // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
     TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
-void i2c_stop(void){
+void i2c_slave_stop(void){
     // clear acknowledge and enable bits
     TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
 ISR(TWI_vect){
     uint8_t ack = 1;
-    // temporary stores the received data
-    //uint8_t data;
-    
+
     switch(TW_STATUS){
         case TW_SR_SLA_ACK:
             // The device is now a slave receiver
@@ -38,13 +41,13 @@ ISR(TWI_vect){
             if(!slave_has_register_set){
                 buffer_address = TWDR;
 
-                if (buffer_address >= RX_BUFFER_SIZE){ // address out of bounds dont ack
-                    ack = 0;
-                    buffer_address = 0;
+                if (buffer_address >= I2C_SLAVE_REG_COUNT) {  // address out of bounds dont ack
+                  ack            = 0;
+                  buffer_address = 0;
                 }
                 slave_has_register_set = true; // address has been receaved now fill in buffer
             } else {
-                rxbuffer[buffer_address] = TWDR;
+                i2c_slave_reg[buffer_address] = TWDR;
                 buffer_address++;
             }
             break;
@@ -52,7 +55,7 @@ ISR(TWI_vect){
         case TW_ST_SLA_ACK:
         case TW_ST_DATA_ACK:
             // This device is a slave transmitter and master has requested data
-            TWDR = txbuffer[buffer_address];
+            TWDR = i2c_slave_reg[buffer_address];
             buffer_address++;
             break;
 
@@ -63,6 +66,6 @@ ISR(TWI_vect){
             break;
     }
 
-    // Reset i2c state mahcine to be ready for next interrupt
+    // Reset i2c state machine to be ready for next interrupt
     TWCR |= (1 << TWIE) | (1 << TWINT) | (ack << TWEA) | (1 << TWEN);
 }
\ No newline at end of file