qwerty_code_friendly: configurable left thumb

[qmk_firmware.git] / docs / isp_flashing_guide.md

diff --git a/docs/isp_flashing_guide.md b/docs/isp_flashing_guide.md
index 02b34497eae08a2ab893dcf4692ee82d73c85c9a..0819f2748077ff8f22e5342068888951d8034735 100644 (file)
--- a/docs/isp_flashing_guide.md
+++ b/docs/isp_flashing_guide.md
@@ -64,7 +64,7 @@ Once you've made your changes, you can click the Upload button (right arrow), wh
 
 ## The .hex file
 
-Before flashing your firmware, you're going to need to and do a little preparation. We'll be appending [this bootloader (also a .hex file)](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader.hex) to the end of our firmware by opening the original .hex file in a text editor, and removing the last line, which should be `:00000001FF` (this is an EOF message). After that's been removed, copy the entire bootloader's contents and paste it at the end of the original file, and save it. 
+Before flashing your firmware, you're going to need to and do a little preparation. We'll be appending [this bootloader (also a .hex file)](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1_0_0.hex) to the end of our firmware by opening the original .hex file in a text editor, and removing the last line, which should be `:00000001FF` (this is an EOF message). After that's been removed, copy the entire bootloader's contents and paste it at the end of the original file, and save it. 
 
 It's possible to use other bootloaders here in the same way, but __you need a bootloader__, otherwise you'll have to ISP to write new firmware to your keyboard.