Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191)

[qmk_firmware.git] / docs / getting_started_build_tools.md

diff --git a/docs/getting_started_build_tools.md b/docs/getting_started_build_tools.md
index 6c8eca0de4a4ea91ed37fac7cc0580585e5c14bf..88f3642b280fbdadba5aaa4598f4977cd531e845 100644 (file)
--- a/docs/getting_started_build_tools.md
+++ b/docs/getting_started_build_tools.md
@@ -4,6 +4,8 @@ This page describes setting up the build environment for QMK. These instructions
 
 <!-- FIXME: We should have ARM instructions somewhere. -->
 
+Note: If it is your first time here, Check out the "Complete Newbs guide" instead
+
 ## Linux
 
 To ensure you are always up to date, you can just run `sudo util/install_dependencies.sh`. That should always install all the dependencies needed. **This will run `apt-get upgrade`.**
@@ -31,11 +33,15 @@ git
 
 Install the dependencies with your favorite package manager.
 
-Debian/Ubuntu example:
+Debian / Ubuntu example:
 
     sudo apt-get update
     sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi libnewlib-arm-none-eabi
 
+Fedora / Red Hat example:
+
+    sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs arm-none-eabi-binutils-cs arm-none-eabi-newlib
+
 ## Nix
 
 If you're on [NixOS](https://nixos.org/), or have Nix installed on Linux or macOS, run `nix-shell` from the repository root to get a build environment.
@@ -50,11 +56,13 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew tap osx-cross/avr
     brew tap PX4/homebrew-px4
     brew update
-    brew install avr-gcc
+    brew install avr-gcc@7
     brew install dfu-programmer
+    brew install dfu-util
     brew install gcc-arm-none-eabi
+    brew install avrdude
 
-This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage.
+This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@7` can take over 20 minutes and exhibit high CPU usage.
 
 ## Windows with msys2 (recommended)
 
@@ -62,9 +70,9 @@ The best environment to use, for Windows Vista through any later version (tested
 
 * Install msys2 by downloading it and following the instructions here: http://www.msys2.org
 * Open the ``MSYS2 MingGW 64-bit`` shortcut
-* Navigate to your qmk checkout. For example, if it's in the root of your c drive:
+* Navigate to your QMK repository. For example, if it's in the root of your c drive:
  * `$ cd /c/qmk_firmware`
-* Run `util/msys2_install.sh` and follow the prompts
+* Run `util/qmk_install.sh` and follow the prompts
 
 ## Windows 10 (deprecated)
 These are the old instructions for Windows 10. We recommend you use [MSYS2 as outlined above](#windows-with-msys2-recommended).
@@ -127,7 +135,7 @@ docker run -e keymap=gwen -e keyboard=ergodox_ez --rm -v $('pwd'):/qmk:rw edasqu
 On Windows Docker seems to have issues with the VOLUME tag in Dockerfile, and `$('pwd')` won't print a Windows compliant path; use full path instead, like this:
 
 ```bash
-docker run -e keymap=default -e keyboard=ergobox_ez --rm -v D:/Users/Sacapuces/Documents/Repositories/qmk:/qmk:rw edasque/qmk_firmware
+docker run -e keymap=default -e keyboard=ergodox_ez --rm -v D:/Users/Sacapuces/Documents/Repositories/qmk:/qmk:rw edasque/qmk_firmware
 
 ```