Usbasploader bootloader option addition (#6304)

[qmk_firmware.git] / docs / getting_started_build_tools.md

diff --git a/docs/getting_started_build_tools.md b/docs/getting_started_build_tools.md
index eb9f5b370fb26945d5a5cbd781ed905d14f62feb..268cc94c38072bba7afa1c871b006e28d975cb14 100644 (file)
--- a/docs/getting_started_build_tools.md
+++ b/docs/getting_started_build_tools.md
@@ -4,7 +4,9 @@ This page describes setting up the build environment for QMK. These instructions
 
 <!-- FIXME: We should have ARM instructions somewhere. -->
 
-Note: If it is your first time here, Check out the "Complete Newbs guide" instead
+**Note:** If this is your first time here, check out the [Complete Newbs Guide](newbs.md) page.
+
+Before continuing, double check that your submodules (third-party libraries) are up to date by running `make git-submodule`.
 
 ## Linux
 
@@ -44,9 +46,7 @@ Fedora / Red Hat example:
     
 Arch / Manjaro example:
 
-    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git
-
-(the `dfu-programmer` package is availble on AUR only so you should download from there or use an AUR helper)
+    pacman -S base-devel gcc unzip wget zip avr-gcc avr-binutils avr-libc dfu-util arm-none-eabi-gcc arm-none-eabi-binutils arm-none-eabi-newlib git dfu-programmer dfu-util
 
 ## Nix
 
@@ -62,14 +62,14 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew tap osx-cross/avr
     brew tap PX4/homebrew-px4
     brew update
-    brew install avr-gcc@7
-    brew link --force avr-gcc@7
+    brew install avr-gcc@8
+    brew link --force avr-gcc@8
     brew install dfu-programmer
     brew install dfu-util
     brew install gcc-arm-none-eabi
     brew install avrdude
 
-This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@7` can take over 20 minutes and exhibit high CPU usage.
+This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of `avr-gcc@8` can take over 20 minutes and exhibit high CPU usage.
 
 ## Windows with msys2 (recommended)