QMK uses Hue, Saturation, and Value to set color rather than using RGB. You can use the color wheel below to see how this works. Changing the Hue will cycle around the circle. Saturation will affect the intensity of the color, which you can see as you move from the inner part to the outer part of the wheel. Value sets the overall brightness.
-![gitbook/images/color-wheel.svg]
+<img src="gitbook/images/color-wheel.svg" alt="HSV Color Wheel" width="250">
-If you would like to learn more about HSV you can start with the [wikipedia article](https://en.wikipedia.org/wiki/HSL_and_HSV).
+If you would like to learn more about HSV you can start with the [Wikipedia article](https://en.wikipedia.org/wiki/HSL_and_HSV).
## Configuration
RGBLIGHT_ENABLE = yes
-You can configure the behavior of the RGB lighting by defining values inside `config.h`.
+You can configure the behavior of the RGB lighting by defining values inside `config.h`.
### Required Configuration
-At minimum you have to define the pin your LED strip is connected to and the number of LEDs connected.
+At minimum you have to define the pin your LED strip is connected to and the number of LEDs connected.
```c
#define RGB_DI_PIN D7 // The pin the LED strip is connected to
| `RGBLIGHT_HUE_STEP` | 10 | How many hues you want to have available. |
| `RGBLIGHT_SAT_STEP` | 17 | How many steps of saturation you'd like. |
| `RGBLIGHT_VAL_STEP` | 17 | The number of levels of brightness you want. |
+| `RGBLIGHT_LIMIT_VAL` | 255 | Limit the val of HSV to limit the maximum brightness simply. |
### Animations
| Option | Default Value | Description |
|--------|---------------|-------------|
| `RGBLIGHT_ANIMATIONS` | | `#define` this to enable animation modes. |
-| `RGBLIGHT_EFFECT_SNAKE_LENGTH` | 4 | The number of LEDs to light up for the "snake" mode. |
-| `RGBLIGHT_EFFECT_KNIGHT_LENGTH` | 3 | The number of LEDs to light up for the "knight" mode. |
+| `RGBLIGHT_EFFECT_BREATHE_CENTER` | 1.85 | Used to calculate the curve for the breathing animation. Valid values 1.0-2.7. |
+| `RGBLIGHT_EFFECT_BREATHE_MAX` | 255 | The maximum brightness for the breathing mode. Valid values 1-255. |
+| `RGBLIGHT_EFFECT_SNAKE_LENGTH` | 4 | The number of LEDs to light up for the "snake" animation. |
+| `RGBLIGHT_EFFECT_KNIGHT_LENGTH` | 3 | The number of LEDs to light up for the "knight" animation. |
| `RGBLIGHT_EFFECT_KNIGHT_OFFSET` | 0 | Start the knight animation this many LEDs from the start of the strip. |
| `RGBLIGHT_EFFECT_KNIGHT_LED_NUM` | RGBLED_NUM | The number of LEDs to have the "knight" animation travel. |
| `RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL` | 1000 | How long to wait between light changes for the "christmas" animation. Specified in ms. |
const uint16_t RGBLED_GRADIENT_RANGES[] PROGMEM = {360, 240, 180, 120, 90};
```
+### LED Control
+
+Look in `rgblights.h` for all available functions, but if you want to control all or some LEDs your goto functions are:
+
+```c
+rgblight_disable(); // turn all lights off
+rgblight_enable(); // turn lights on, based on their previous state (stored in EEPROM)
+
+rgblight_setrgb(r, g, b); // where r/g/b is a number from 0..255. Turns all the LEDs to this color
+rgblight_sethsv(h, s, v); // HSV color control
+rgblight_setrgb_at(r,g,b, LED); // control a single LED. 0 <= LED < RGBLED_NUM
+rgblight_sethsv_at(h,s,v, LED); // control a single LED. 0 <= LED < RGBLED_NUM
+```
+
## RGB Lighting Keycodes
These control the RGB Lighting functionality.
-| Long Name | Short Name | Description |
-|-----------|------------|-------------|
-||`RGB_TOG`|toggle on/off|
-||`RGB_MOD`|cycle through modes|
-||`RGB_HUI`|hue increase|
-||`RGB_HUD`|hue decrease|
-||`RGB_SAI`|saturation increase|
-||`RGB_SAD`|saturation decrease|
-||`RGB_VAI`|value (brightness) increase|
-||`RGB_VAD`|value (brightness) decrease|
-|`RGB_MODE_PLAIN`|`RGB_M_P `| Switch to the static no animation mode |
-|`RGB_MODE_BREATHE`|`RGB_M_B`| Switch to the breathing mode |
-|`RGB_MODE_RAINBOW`|`RGB_M_R`| Switch to the rainbow mode ||
-|`RGB_MODE_SWIRL`|`RGB_M_SW`| Switch to the swirl mode |
-|`RGB_MODE_SNAKE`|`RGB_M_SN`| Switch to the snake mode |
-|`RGB_MODE_KNIGHT`|`RGB_M_K`| Switch to the knight animation |
-|`RGB_MODE_XMAS`|`RGB_M_X`| Switch to the Christmas animation |
-|`RGB_MODE_GRADIENT`|`RGB_M_G`| Switch to the static gradient mode |
+|Key |Aliases |Description |
+|-------------------|----------|--------------------------------------------------------------------|
+|`RGB_TOG` | |Toggle RGB lighting on or off |
+|`RGB_MODE_FORWARD` |`RGB_MOD` |Cycle through modes, reverse direction when Shift is held |
+|`RGB_MODE_REVERSE` |`RGB_RMOD`|Cycle through modes in reverse, forward direction when Shift is held|
+|`RGB_HUI` | |Increase hue |
+|`RGB_HUD` | |Decrease hue |
+|`RGB_SAI` | |Increase saturation |
+|`RGB_SAD` | |Decrease saturation |
+|`RGB_VAI` | |Increase value (brightness) |
+|`RGB_VAD` | |Decrease value (brightness) |
+|`RGB_MODE_PLAIN` |`RGB_M_P `|Static (no animation) mode |
+|`RGB_MODE_BREATHE` |`RGB_M_B` |Breathing animation mode |
+|`RGB_MODE_RAINBOW` |`RGB_M_R` |Rainbow animation mode |
+|`RGB_MODE_SWIRL` |`RGB_M_SW`|Swirl animation mode |
+|`RGB_MODE_SNAKE` |`RGB_M_SN`|Snake animation mode |
+|`RGB_MODE_KNIGHT` |`RGB_M_K` |"Knight Rider" animation mode |
+|`RGB_MODE_XMAS` |`RGB_M_X` |Christmas animation mode |
+|`RGB_MODE_GRADIENT`|`RGB_M_G` |Static gradient animation mode |
+
+note: for backwards compatibility, `RGB_SMOD` is an alias for `RGB_MOD`.
## Hardware Modification
projects / qmk_firmware.git / blobdiff