The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second.
In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM.
+
+## Backlight Functions
+
+|Function |Description |
+|----------|----------------------------------------------------------|
+|`backlight_toggle()` |Turn the backlight on or off |
+|`backlight_step()` |Cycle through backlight levels |
+|`backlight_increase()` |Increase the backlight level |
+|`backlight_decrease()` |Decrease the backlight level |
+|`backlight_level(x)` |Sets the backlight level to specified level |
+|`get_backlight_level()`|Toggle backlight breathing |
+
+### Backlight Breathing Functions
+
+|Function |Description |
+|----------|----------------------------------------------------------|
+|`breathing_toggle()` |Turn the backlight breathing on or off |
+|`breathing_enable()` |Turns on backlight breathing |
+|`breathing_disable()` |Turns off backlight breathing |