Mask off keycode/layer/mod where possible in LT(), MT(), etc. (#3430)

[qmk_firmware.git] / docs / feature_backlight.md

diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md
index 6140e6a0abe6ca0a2c300ef5e5caba5b00e43be8..8f883e08fb2b7e23d1d141dd3e7b6fec3cec8b98 100644 (file)
--- a/docs/feature_backlight.md
+++ b/docs/feature_backlight.md
@@ -51,3 +51,22 @@ In this way `OCRxx` essentially controls the duty cycle of the LEDs, and thus th
 
 The breathing effect is achieved by registering an interrupt handler for `TIMER1_OVF_vect` that is called whenever the counter resets, roughly 244 times per second.
 In this handler, the value of an incrementing counter is mapped onto a precomputed brightness curve. To turn off breathing, the interrupt handler is simply disabled, and the brightness reset to the level stored in EEPROM.
+
+## Backlight Functions
+
+|Function  |Description                                               |
+|----------|----------------------------------------------------------|
+|`backlight_toggle()`   |Turn the backlight on or off                 |
+|`backlight_step()`     |Cycle through backlight levels               |
+|`backlight_increase()` |Increase the backlight level                 |
+|`backlight_decrease()` |Decrease the backlight level                 |
+|`backlight_level(x)`   |Sets the backlight level to specified level  |
+|`get_backlight_level()`|Toggle backlight breathing                   |
+
+### Backlight Breathing Functions
+
+|Function  |Description                                               |
+|----------|----------------------------------------------------------|
+|`breathing_toggle()`  |Turn the backlight breathing on or off        |
+|`breathing_enable()`  |Turns on backlight breathing                  |
+|`breathing_disable()` |Turns off backlight breathing                 |