Usbasploader bootloader option addition (#6304)

[qmk_firmware.git] / docs / feature_advanced_keycodes.md

diff --git a/docs/feature_advanced_keycodes.md b/docs/feature_advanced_keycodes.md
index d23cb31d9a52197cb8ee4d26010f92b3bbce0e5c..f748ccd70c2f1b3d9e7e5c4d692bae20776e3d3a 100644 (file)
--- a/docs/feature_advanced_keycodes.md
+++ b/docs/feature_advanced_keycodes.md
@@ -11,17 +11,17 @@ People often define custom names using `#define`. For example:
 #define ALT_TAB LALT(KC_TAB)
 ```
 
-This will allow you to use `FN_CAPS` and `ALT_TAB` in your `KEYMAP()`, keeping it more readable.
+This will allow you to use `FN_CAPS` and `ALT_TAB` in your keymap, keeping it more readable.
 
 ## Caveats
 
-Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored.
+Currently, `LT()` and `MT()` are limited to the [Basic Keycode set](keycodes_basic.md), meaning you can't use keycodes like `LCTL()`, `KC_TILD`, or anything greater than `0xFF`. Modifiers specified as part of a Layer Tap or Mod Tap's keycode will be ignored. If you need to apply modifiers to your tapped keycode, [Tap Dance](https://github.com/qmk/qmk_firmware/blob/master/docs/feature_tap_dance.md#example-5-using-tap-dance-for-advanced-mod-tap-and-layer-tap-keys) can be used to accomplish this.
 
 Additionally, if at least one right-handed modifier is specified in a Mod Tap or Layer Tap, it will cause all modifiers specified to become right-handed, so it is not possible to mix and match the two.
 
 # Switching and Toggling Layers
 
-These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers) When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
+These functions allow you to activate layers in various ways. Note that layers are not generally independent layouts -- multiple layers can be activated at once, and it's typical for layers to use `KC_TRNS` to allow keypresses to pass through to lower layers. For a detailed explanation of layers, see [Keymap Overview](keymap.md#keymap-and-layers). When using momentary layer switching with MO(), LM(), TT(), or LT(), make sure to leave the key on the above layers transparent or it may not work as intended.
 
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
@@ -146,7 +146,7 @@ Additionally, hitting keys five times in a short period will lock that key. This
 You can control the behavior of one shot keys by defining these in `config.h`:
 
 ```c
-#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped this number of times again. */
+#define ONESHOT_TAP_TOGGLE 5  /* Tapping this number of times holds the key until tapped once again. */
 #define ONESHOT_TIMEOUT 5000  /* Time (in ms) before the one shot key is released */
 ```
 
@@ -256,10 +256,10 @@ If you press a Mod Tap key, tap another key (press and release) and then release
 
 For Instance:
 
-- `SHFT_T(KC_A)` Down
+- `SFT_T(KC_A)` Down
 - `KC_X` Down
 - `KC_X` Up
-- `SHFT_T(KC_A)` Up
+- `SFT_T(KC_A)` Up
 
 Normally, if you do all this within the `TAPPING_TERM` (default: 200ms) this will be registered as `ax` by the firmware and host system. With permissive hold enabled, this modifies how this is handled by considering the Mod Tap keys as a Mod if another key is tapped, and would registered as `X` (`SHIFT`+`x`). 
 
@@ -279,9 +279,9 @@ Setting `Ignore Mod Tap Interrupt` requires  holding both keys for the `TAPPING_
 
 For Instance:
 
-- `SHFT_T(KC_A)` Down
+- `SFT_T(KC_A)` Down
 - `KC_X` Down
-- `SHFT_T(KC_A)` Up
+- `SFT_T(KC_A)` Up
 - `KC_X` Up
 
 Normally, this would send `X` (`SHIFT`+`x`). With `Ignore Mod Tap Interrupt` enabled, holding both keys are required for the `TAPPING_TERM` to register the hold action. A quick tap will output `ax` in this case, while a hold on both will still output `X`  (`SHIFT`+`x`).
@@ -303,11 +303,11 @@ When the user holds a key after tap, this repeats the tapped key rather to hold
 
 Example:
 
-- SHFT_T(KC_A) Down
-- SHFT_T(KC_A) Up
-- SHFT_T(KC_A) Down
+- SFT_T(KC_A) Down
+- SFT_T(KC_A) Up
+- SFT_T(KC_A) Down
 - wait more than tapping term...
-- SHFT_T(KC_A) Up
+- SFT_T(KC_A) Up
 
 With default settings, `a` will be sent on the first release, then `a` will be sent on the second press allowing the computer to trigger its auto repeat function.