Update CODE_OF_CONDUCT.md

[qmk_firmware.git] / docs / custom_quantum_functions.md

diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md
index e7a45e0bfd3718b487384d6a9b3338329a04ed65..10c5c75a2d14108ef21c8d665aac6ad69c33add0 100644 (file)
--- a/docs/custom_quantum_functions.md
+++ b/docs/custom_quantum_functions.md
@@ -98,10 +98,10 @@ This allows you to control the 5 LED's defined as part of the USB Keyboard spec.
 * `USB_LED_COMPOSE`
 * `USB_LED_KANA`
 
-### Example `led_set_kb()` Implementation
+### Example `led_set_user()` Implementation
 
 ```
-void led_set_kb(uint8_t usb_led) {
+void led_set_user(uint8_t usb_led) {
     if (usb_led & (1<<USB_LED_NUM_LOCK)) {
         PORTB |= (1<<0);
     } else {
@@ -135,18 +135,19 @@ void led_set_kb(uint8_t usb_led) {
 * Keyboard/Revision: `void led_set_kb(uint8_t usb_led)`
 * Keymap: `void led_set_user(uint8_t usb_led)`
 
+
 # Matrix Initialization Code
 
-Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.
+Before a keyboard can be used the hardware must be initialized. QMK handles initialization of the keyboard matrix itself, but if you have other hardware like LED's or i&#xb2;c controllers you will need to set up that hardware before it can be used.  
+
 
-### Example `matrix_init_kb()` Implementation
+### Example `matrix_init_user()` Implementation
 
 This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
 
 ```
-void matrix_init_kb(void) {
+void matrix_init_user(void) {
   // Call the keymap level matrix init.
-  matrix_init_user();
 
   // Set our LED pins as output
   DDRB |= (1<<1);
@@ -166,7 +167,7 @@ Whenever possible you should customize your keyboard by using `process_record_*(
 
 ### Example `matrix_scan_*` Implementation
 
-This example has been deliberately omitted. You should understand enough about QMK internals to write this without an example before hooking into such a performance sensitive area. If you need help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) or [chat with us on gitter](https://gitter.im/qmk/qmk_firmware).
+This example has been deliberately omitted. You should understand enough about QMK internals to write this without an example before hooking into such a performance sensitive area. If you need help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) or [chat with us on Discord](https://discord.gg/Uq7gcHh).
 
 ### `matrix_scan_*` Function Documentation
 
@@ -176,3 +177,70 @@ This example has been deliberately omitted. You should understand enough about Q
 This function gets called at every matrix scan, which is basically as often as the MCU can handle. Be careful what you put here, as it will get run a lot.
 
 You should use this function if you need custom matrix scanning code. It can also be used for custom status output (such as LED's or a display) or other functionality that you want to trigger regularly even when the user isn't typing.
+
+
+# Keyboard Idling/Wake Code
+
+If the board supports it, it can be "idled", by stopping a number of functions.  A good example of this is RGB lights or backlights.   This can save on power consumption, or may be better behavior for your keyboard.  
+
+This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_init_*`, which are called when the system is board is idled and when it wakes up, respectively. 
+
+
+### Example suspend_power_down_user() and suspend_wakeup_init_user() Implementation
+
+This example, at the keyboard level, sets up B1, B2, and B3 as LED pins.
+
+```
+void suspend_power_down_user(void)
+{
+    rgb_matrix_set_suspend_state(true);
+}
+
+void suspend_wakeup_init_user(void)
+{
+    rgb_matrix_set_suspend_state(false);
+}
+
+```
+
+### `keyboard_init_*` Function Documentation
+
+* Keyboard/Revision: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
+* Keymap: `void suspend_power_down_kb(void)` and `void suspend_wakeup_init_user(void)`
+
+# Layer Change Code
+
+This runs code every time that the layers get changed.  This can be useful for layer indication, or custom layer handling. 
+
+### Example `layer_state_set_*` Implementation
+
+This example shows how to set the [RGB Underglow](feature_rgblight.md) lights based on the layer, using the Planck as an example
+
+```
+uint32_t layer_state_set_user(uint32_t state) {
+    switch (biton32(state)) {
+    case _RAISE:
+        rgblight_setrgb (0x00,  0x00, 0xFF);
+        break;
+    case _LOWER:
+        rgblight_setrgb (0xFF,  0x00, 0x00);
+        break;
+    case _PLOVER:
+        rgblight_setrgb (0x00,  0xFF, 0x00);
+        break;
+    case _ADJUST:
+        rgblight_setrgb (0x7A,  0x00, 0xFF);
+        break;
+    default: //  for any other layers, or the default layer
+        rgblight_setrgb (0x00,  0xFF, 0xFF);
+        break;
+    }
+  return state;
+}
+```
+### `layer_state_set_*` Function Documentation
+
+* Keyboard/Revision: `void uint32_t layer_state_set_kb(uint32_t state)`
+* Keymap: `uint32_t layer_state_set_user(uint32_t state)`
+
+The `state` is the bitmask of the active layers, as explained in the [Keymap Overview](keymap.md#keymap-layer-status)