Remove line for hands selection via EEPROM, reduce tap duration from 200ms to 150ms

[qmk_firmware.git] / doc / PCB_GUIDE.md

diff --git a/doc/PCB_GUIDE.md b/doc/PCB_GUIDE.md
index 3fad41dfb44c8be1d2eb3727464ff0db8c3727a2..16de711142a861c8c89c43ade3919765cda99501 100644 (file)
--- a/doc/PCB_GUIDE.md
+++ b/doc/PCB_GUIDE.md
@@ -5,7 +5,7 @@
 ### Windows
 1. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**.
 2. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location.
-3. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/jackhumbert/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer.
+3. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer.
 4. Right-click on the 1-setup-path-win batch script, select "Run as administrator", and accept the User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up.
 5. Right-click on the 2-setup-environment-win batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete!
 
@@ -32,7 +32,7 @@ Note that, since it will be directly accessing USB hardware, the
 `dfu-programmer` program needs to be run as root.
 
 ## Verify Your Installation
-1. Clone the following repository: https://github.com/jackhumbert/qmk_firmware
+1. Clone the following repository: https://github.com/qmk/qmk_firmware
 2. Open a Terminal and `cd` into `qmk_firmware/keyboards/planck`
 3. Run `make`. This should output a lot of information about the build process.
 
@@ -80,7 +80,7 @@ when trying to 'make dfu' on Windows you need to copy the dfu-programmer.exe to
 
 ### Keymap
 
-Unlike the other keymaps, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/jackhumbert/qmk_firmware/blob/master/quantum/keymap_common.h).
+Unlike the other keymaps, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/qmk/qmk_firmware/blob/master/quantum/keymap_common.h).
 
 You can use modifiers with keycodes like this: