# Note that I have to refer to debhelper programs with ./, to make sure
# I run the most current ones.
#
-# This is _not_ a good example of a debhelper rules file, but I didn't need
-# to tell you that; just see the 25 lines of inlined perl below..
+# This is _not_ a good example of a debhelper rules file.
# See examples/ for some good examples.
# Ensure that builds are self-hosting, which means I have to use the .pm
# be sure to use the new templates from this package.
export DH_AUTOSCRIPTDIR=autoscripts
-# Use most recent compatability level.
-export DH_COMPAT=3
-
-# Figure out the current debhelper version.
-VERSION=$(shell expr "`dpkg-parsechangelog 2>/dev/null |grep Version:`" : '.*Version: \(.*\)')
-
-PERLLIBDIR=$(shell perl -MConfig -e 'print $$Config{vendorlib}')
-
-# Debug
-#export DH_VERBOSE=1
-
-build: test build-stamp
-build-stamp:
- # Generate the main man page. All the perl cruft is to get a list
- # of debhelper commands with short descriptions into the man page.
- pod2man -c Debhelper -r "$(VERSION)" debhelper.pod | \
- perl -e ' \
+# This generates a list of synopses of debhelper commands, and substitutes
+# it in to the #LIST# line on the man page fed to it on stdin. Must be passes
+# parameters of all the executables or pod files to get the synopses from.
+# (Like I said, this is not a good example of a debhelper rules file..)
+MAKEMANLIST=perl -e ' \
undef $$/; \
foreach (@ARGV) { \
open (IN, $$_) or die "$$_: $$!"; \
$$file=<IN>; \
close IN; \
- if ($$file=~m/=head1 NAME\n\n(.*?) - (.*?)\n/m) { \
+ if ($$file=~m/=head1 .*\n\n(.*?) - (.*?)\n/m) { \
$$collect.=".IP $$1(1)\n$$2\n"; \
} \
} \
END { \
while (<STDIN>) { \
- s/#LIST#/$$collect/; \
+ s/\#LIST\#/$$collect/; \
print; \
}; \
- }' `find . -type f -perm +1 -maxdepth 1 -name "dh_*" | sort` > debhelper.1
- # Turn all executables into man pages.
- find . -type f -perm +1 -maxdepth 1 -name "dh_*" \
- -exec pod2man -c Debhelper -r "$(VERSION)" {} {}.1 \;
+ }'
+
+# Figure out the `current debhelper version.
+VERSION=$(shell expr "`dpkg-parsechangelog 2>/dev/null |grep Version:`" : '.*Version: \(.*\)')
+
+PERLLIBDIR=$(shell perl -MConfig -e 'print $$Config{vendorlib}')
+
+POD2MAN=pod2man -c Debhelper -r "$(VERSION)"
+
+build: test build-stamp
+build-stamp:
+ # Build all the man pages.
+ find . -type f -perm +100 -maxdepth 1 -name "dh_*" \
+ -exec $(POD2MAN) {} {}.1 \;
+ $(POD2MAN) --section=7 debhelper.pod | \
+ $(MAKEMANLIST) `find . -type f -perm +100 -maxdepth 1 -name "dh_*" | sort` > debhelper.7
+ # Translated pages.
+ set -e; \
+ for dir in man/*; do \
+ lang=`basename $$dir`; \
+ for file in $$dir/dh_*.pod; do \
+ prog=`basename $$file | sed 's/.pod//'`; \
+ $(POD2MAN) $$file $$prog.$$lang.1; \
+ done; \
+ $(POD2MAN) --section=7 $$dir/debhelper.pod | \
+ $(MAKEMANLIST) `find $$dir -type f -maxdepth 1 -name "dh_*.pod" | sort` > debhelper.$$lang.7; \
+ done
+
+ printf "package Debian::Debhelper::Dh_Version;\n\$$version='$(VERSION)';" > \
+ Debian/Debhelper/Dh_Version.pm
touch build-stamp
clean:
./dh_testdir
./dh_testroot
- -./dh_clean *.1 *-stamp
+ ./dh_clean *.1 *.7 *-stamp Debian/Debhelper/Dh_Version.pm
test: test-stamp
test-stamp:
./dh_clean
- DH_VERSION=10 perl -MTest::Harness -e 'runtests grep { ! /CVS/ } @ARGV' t/*
+ DH_VERSION=10 perl -MTest::Harness -e 'runtests grep { ! /CVS/ && ! /\.svn/ } @ARGV' t/*
./dh_clean
touch test-stamp
-# Build architecture-dependent files here.
-binary-arch: build
-# Nothing to do.
-
-# Build architecture-independent files here.
binary-indep: build
./dh_testdir
./dh_testroot
./dh_clean -k
- ./dh_installdirs usr/bin usr/share/debhelper \
- $(PERLLIBDIR)/Debian/Debhelper
-
- printf "package Debian::Debhelper::Dh_Version;\n\$$version='$(VERSION)';" > \
- debian/debhelper/$(PERLLIBDIR)/Debian/Debhelper/Dh_Version.pm
-
- find . -perm +111 -maxdepth 1 -type f -not -name "*.pl" \
- -exec install -p {} debian/debhelper/usr/bin \;
- cp -a Debian/Debhelper/*.pm \
- debian/debhelper/$(PERLLIBDIR)/Debian/Debhelper/
- cp -a autoscripts debian/debhelper/usr/share/debhelper
- rm -rf debian/debhelper/usr/share/debhelper/autoscripts/CVS
-
- ./dh_installdocs `find doc -type f | grep -v CVS`
- ./dh_installexamples `find examples -type f | grep -v CVS`
- ./dh_installmenu
- ./dh_installman *.1
- ./dh_installinfo
+ ./dh_install -X .1 dh_* usr/bin
+ ./dh_install Debian/Debhelper/*.pm $(PERLLIBDIR)/Debian/Debhelper/
+ ./dh_install autoscripts usr/share/debhelper
+ ./dh_installdocs doc/*
+ ./dh_installexamples examples/*
+ ./dh_installman *.1 *.7
./dh_installchangelogs
./dh_shlibdeps
./dh_link
# Update the debhelper web page. Not intended for use by anyone except the
# author.
+DIR=/home/web/kitenet.net/programs/debhelper
installhook:
- cp debian/changelog /home/pub/programs/debhelper/CHANGES
- echo -n $(VERSION) > /home/pub/programs/debhelper/LATEST-VERSION-IS
+ cp debian/changelog $(DIR)/CHANGES
+ echo -n $(VERSION) > $(DIR)/LATEST-VERSION-IS
+binary-arch:
binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary dist
-
+.PHONY: build clean binary-indep binary-arch binary