Change MCU setting to ATmega32U2

[tmk_firmware.git] / converter / sun_usb / Makefile

diff --git a/converter/sun_usb/Makefile b/converter/sun_usb/Makefile
index 4c79a8d27877b268556cae6f5ff8a6d27784f6bd..35c4bb123b232c5cf80466798e4f95efc471a181 100644 (file)
--- a/converter/sun_usb/Makefile
+++ b/converter/sun_usb/Makefile
@@ -11,6 +11,7 @@ TARGET_DIR = .
 SRC =  keymap.c \
        matrix.c \
        led.c \
+       command_extra.c \
        protocol/serial_soft.c
 
 CONFIG_H = config.h
@@ -19,9 +20,10 @@ CONFIG_H = config.h
 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
 #MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
+#MCU = atmega32u4       # Teensy 2.0
 #MCU = at90usb646       # Teensy++ 1.0
 #MCU = at90usb1286      # Teensy++ 2.0
+MCU = atmega32u2
 
 
 # Processor frequency.
@@ -68,7 +70,7 @@ CONSOLE_ENABLE = yes  # Console for debug
 #   Teensy halfKay   512
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
-OPT_DEFS += -DBOOT_SIZE=4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 
 # Search Path