cleans up folder structure

[qmk_firmware.git] / converter / serialmouse_usb / config.h

diff --git a/converter/serialmouse_usb/config.h b/converter/serialmouse_usb/config.h
deleted file mode 100644 (file)
index b257d99..0000000
--- a/converter/serialmouse_usb/config.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include <avr/interrupt.h>
-
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x2222
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    t.m.k.
-#define PRODUCT         serial mouse converter
-#define DESCRIPTION     convert serial mouse into USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 0
-#define MATRIX_COLS 0
-
-
-/* key combination for command */
-#define IS_COMMAND()    false
-
-
-
-#ifdef SERIAL_MOUSE_MICROSOFT
-    /*
-     * Serial(USART) configuration (for Microsoft serial mice)
-     *     asynchronous, positive logic, 1200baud, bit order: LSB first
-     *     1-start bit, 7-data bit, no parity, 1-stop bit
-     */
-    #define SERIAL_UART_BAUD       1200
-    #define SERIAL_UART_DATA       UDR1
-    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
-    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
-    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
-    #define SERIAL_UART_INIT()     do { \
-        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
-        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
-        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
-        UCSR1C = (1<<UCSZ11) | (0<<UCSZ10);  /* no parity, 1 stop bit, 7-bit characters */ \
-        sei(); \
-    } while(0)
-
-    // for Microsoft mouse protocol
-    /* Serial(USART) configuration
-     *     asynchronous, negative logic, 1200baud, no flow control
-     *     1-start bit, 7-data bit, non parity, 1-stop bit
-     */
-    #define SERIAL_SOFT_BAUD            1200
-    #define SERIAL_SOFT_DATA_7BIT
-    #define SERIAL_SOFT_PARITY_NONE
-    #define SERIAL_SOFT_BIT_ORDER_LSB
-    #define SERIAL_SOFT_LOGIC_NEGATIVE
-    /* RXD Port */
-    #define SERIAL_SOFT_RXD_DDR         DDRD
-    #define SERIAL_SOFT_RXD_PORT        PORTD
-    #define SERIAL_SOFT_RXD_PIN         PIND
-    #define SERIAL_SOFT_RXD_BIT         2
-    #define SERIAL_SOFT_RXD_VECT        INT2_vect
-    /* RXD Interupt */
-    #define SERIAL_SOFT_RXD_INIT()      do { \
-        /* pin configuration: input with pull-up */ \
-        SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
-        SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
-        /* enable interrupt: INT2(rising edge) */ \
-        EICRA |= ((1<<ISC21)|(1<<ISC20)); \
-        EIMSK |= (1<<INT2); \
-        sei(); \
-    } while (0)
-    #define SERIAL_SOFT_RXD_INT_ENTER()
-    #define SERIAL_SOFT_RXD_INT_EXIT()  do { \
-        /* clear interrupt  flag */ \
-        EIFR = (1<<INTF2); \
-    } while (0)
-    #define SERIAL_SOFT_RXD_READ()      (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
-    /* TXD Port */
-    #define SERIAL_SOFT_TXD_HI()
-    #define SERIAL_SOFT_TXD_LO()
-    #define SERIAL_SOFT_TXD_INIT()
-#elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
-    /*
-     * Serial(USART) configuration (for Mousesystems serial mice)
-     *     asynchronous, positive logic, 1200baud, bit order: LSB first
-     *     1-start bit, 8-data bit, no parity, 1-stop bit
-     */
-    #define SERIAL_UART_BAUD       1200
-    #define SERIAL_UART_DATA       UDR1
-    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
-    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
-    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
-    #define SERIAL_UART_INIT()     do { \
-        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
-        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
-        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
-        UCSR1C = (1<<UCSZ11) | (1<<UCSZ10);  /* no parity, 1 stop bit, 8-bit characters */ \
-        sei(); \
-    } while(0)
-#endif
-
-
-
-
-#endif