Fix markdown syntax

[tmk_firmware.git] / converter / ibm4704_usb / README.md

diff --git a/converter/ibm4704_usb/README.md b/converter/ibm4704_usb/README.md
index f38cdd164ab1dcdc06030b6619c4ea42bc3e2f47..a3af4ab31dc7f96f4d3cc1632b4f4dc455b1c4bc 100644 (file)
--- a/converter/ibm4704_usb/README.md
+++ b/converter/ibm4704_usb/README.md
@@ -1,11 +1,29 @@
 IBM 4704 to USB keyboard converter
-=======----=======================
+==================================
 This firmware converts IBM 4704 keyboard protocol to USB HID.
 
+Keyboard initialization process takes a few seconds at start up. During that you will hear buzzer from the keyboard. **You need to plug USB cable after hooking up your keyboard to the converter.**
 
-4704 Connector
---------------
-    Keyboard Plug from front
+
+Supported Keyboard
+------------------
+### IBM capacitive switch models:
+- 6019273 Model 100 50-key (grid layout)      http://kishy.dyndns.org/?p=977
+- 6019284 Model 200 62-key Alpha(60% layout)  http://kishy.dyndns.org/?p=894
+- 6019303 Model 300 77-key Expanded Alpha     http://kbtalking.cool3c.com/article/23272
+- 6020218 Model 400 107-key Full key          http://kishy.dyndns.org/?p=980
+
+### Alps switch(vintage Green) models:
+
+- 5954339 Japanese 102-key    http://deskthority.net/post87127.html#p87127
+- 6112883 Japanese 102-key    http://geekhack.org/index.php?topic=52888.msg1194489#msg1194489
+- 6112884 Japanese 102-key    http://geekhack.org/index.php?topic=50437.msg1193047#msg1193047
+- 6341739 Chinese 102-key     http://geekhack.org/index.php?topic=52888.msg1176566#msg1176566
+
+
+Connector
+---------
+Keyboard Plug from front:
 
     DSUB-9
     -------------
@@ -24,7 +42,7 @@ Connection
 In case of using ATMega32U4(Teensy2.0):
 
 1. Supply power with VCC and GND.
-2. Connect CLOCK to PD1 and DATA to PD2. You can change pin with config.h.
+2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
 3. Optionally you may need pull-up register. 1KOhm probably work.