Change pin configuration

[tmk_firmware.git] / converter / ibm4704_usb / README.md

diff --git a/converter/ibm4704_usb/README.md b/converter/ibm4704_usb/README.md
index 852a4448ac4c3a991980b3243b518ded1f584dec..6541dd6d0cf33544f0b0d496f345ceb1dfe38baa 100644 (file)
--- a/converter/ibm4704_usb/README.md
+++ b/converter/ibm4704_usb/README.md
@@ -2,10 +2,12 @@ IBM 4704 to USB keyboard converter
 ==================================
 This firmware converts IBM 4704 keyboard protocol to USB HID.
 
+Keyboard initialization process takes a few seconds at start up. During that you will hear buzzer from the keyboard. **You need to plug USB cable after hooking up your keyboard to the converter.**
+
 
 4704 Connector
 --------------
-    Keyboard Plug from front
+Keyboard Plug from front:
 
     DSUB-9
     -------------
@@ -24,7 +26,7 @@ Connection
 In case of using ATMega32U4(Teensy2.0):
 
 1. Supply power with VCC and GND.
-2. Connect CLOCK to PD1 and DATA to PD2. You can change pin with config.h.
+2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
 3. Optionally you may need pull-up register. 1KOhm probably work.