Add COMMAND_ENABLE build option

[tmk_firmware.git] / common / command.c

diff --git a/common/command.c b/common/command.c
index 2d01c95e6a9bca5a1cf683f77873a77efc47083a..cb98e1d5f206803fbcc84cb2266aebaeed564502 100644 (file)
--- a/common/command.c
+++ b/common/command.c
@@ -27,20 +27,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "keyboard.h"
 #include "bootloader.h"
 #include "layer_switch.h"
+#include "eeconfig.h"
 #include "command.h"
 
 #ifdef MOUSEKEY_ENABLE
 #include "mousekey.h"
 #endif
 
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
 #   include "usb_keyboard.h"
 #   ifdef EXTRAKEY_ENABLE
 #       include "usb_extra.h"
 #   endif
 #endif
 
-#ifdef HOST_VUSB
+#ifdef PROTOCOL_VUSB
 #   include "usbdrv.h"
 #endif
 
@@ -97,7 +98,6 @@ bool command_extra(uint8_t code)
  ***********************************************************/
 static void command_common_help(void)
 {
-    print_enable = true;
     print("\n\n----- Command Help -----\n");
     print("c:  enter console mode\n");
     print("d:  toggle debug enable\n");
@@ -108,6 +108,7 @@ static void command_common_help(void)
     print("v:  print device version & info\n");
     print("t:  print timer count\n");
     print("s:  print status\n");
+    print("e:  print eeprom boot config\n");
 #ifdef NKRO_ENABLE
     print("n:  toggle NKRO\n");
 #endif
@@ -121,10 +122,42 @@ static void command_common_help(void)
     print("Paus:       jump to bootloader\n");
 }
 
+#ifdef BOOTMAGIC_ENABLE
+static void print_eeprom_config(void)
+{
+    uint8_t eebyte;
+    
+    eebyte = eeconfig_read_debug();
+    print("debug: "); print_hex8(eebyte); print("\n");
+
+    eebyte = eeconfig_read_defalt_layer();
+    print("defalt_layer: "); print_hex8(eebyte); print("\n");
+
+    eebyte = eeconfig_read_keyconf();
+    print("keyconf: "); print_hex8(eebyte); print("\n");
+
+    keyconf kc;
+    kc = (keyconf){ .raw = eebyte };
+    print("keyconf.swap_control_capslock: "); print_hex8(kc.swap_control_capslock); print("\n");
+    print("keyconf.capslock_to_control: "); print_hex8(kc.capslock_to_control); print("\n");
+    print("keyconf.swap_lalt_lgui: "); print_hex8(kc.swap_lalt_lgui); print("\n");
+    print("keyconf.swap_ralt_rgui: "); print_hex8(kc.swap_ralt_rgui); print("\n");
+    print("keyconf.no_gui: "); print_hex8(kc.no_gui); print("\n");
+    print("keyconf.swap_grave_esc: "); print_hex8(kc.swap_grave_esc); print("\n");
+    print("keyconf.swap_backslash_backspace: "); print_hex8(kc.swap_backslash_backspace); print("\n");
+}
+#endif
+
 static bool command_common(uint8_t code)
 {
     static host_driver_t *host_driver = 0;
     switch (code) {
+#ifdef BOOTMAGIC_ENABLE
+        case KC_E:
+            print("eeprom config\n");
+            print_eeprom_config();
+            break;
+#endif
         case KC_CAPSLOCK:
             if (host_get_driver()) {
                 host_driver = host_get_driver();
@@ -140,7 +173,6 @@ static bool command_common(uint8_t code)
             command_common_help();
             break;
         case KC_C:
-            print_enable = true;
             debug_matrix   = false;
             debug_keyboard = false;
             debug_mouse    = false;
@@ -206,19 +238,10 @@ static bool command_common(uint8_t code)
         case KC_T: // print timer
             print_val_hex32(timer_count);
             break;
-        case KC_P: // print toggle
-            if (print_enable) {
-                print("print disabled.\n");
-                print_enable = false;
-            } else {
-                print_enable = true;
-                print("print enabled.\n");
-            }
-            break;
         case KC_S:
             print("\n\n----- Status -----\n");
             print_val_hex8(host_keyboard_leds());
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
             print_val_hex8(UDCON);
             print_val_hex8(UDIEN);
             print_val_hex8(UDINT);
@@ -228,7 +251,7 @@ static bool command_common(uint8_t code)
             print_val_hex8(usb_keyboard_idle_count);
 #endif
 
-#ifdef HOST_VUSB
+#ifdef PROTOCOL_PJRC
 #   if USB_COUNT_SOF
             print_val_hex8(usbSofCount);
 #   endif
@@ -247,7 +270,7 @@ static bool command_common(uint8_t code)
 #ifdef EXTRAKEY_ENABLE
         case KC_PSCREEN:
             // TODO: Power key should take this feature? otherwise any key during suspend.
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
             if (suspend && remote_wakeup) {
                 usb_remote_wakeup();
             } else {
@@ -287,7 +310,6 @@ static bool command_common(uint8_t code)
  ***********************************************************/
 static void command_console_help(void)
 {
-    print_enable = true;
     print("\n\n----- Console Help -----\n");
     print("ESC/q:      quit\n");
 #ifdef MOUSEKEY_ENABLE
@@ -543,9 +565,8 @@ static uint8_t numkey2num(uint8_t code)
 
 static void switch_default_layer(uint8_t layer)
 {
-    // TODO check existence of layer or whether it can be used as default layer
-    print("switch_default_layer: "); print_dec(default_layer); print(" to "); print_dec(layer); 
-    default_layer = layer;
-    layer_switch_clear();
+    print("switch_default_layer: "); print_dec(default_layer); print(" to "); print_dec(layer); print("\n");
+    default_layer_set(layer);
+    overlay_clear();
     clear_keyboard();
 }