Change: 0 means default_layer in current_layer now

[tmk_firmware.git] / common / command.c

diff --git a/common/command.c b/common/command.c
index 8e2e21a7079f6e0be60c2f9c5d0e2867e7795c0f..4c874b1092f75fee5962bb68d384080be1c05686 100644 (file)
--- a/common/command.c
+++ b/common/command.c
@@ -19,6 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <util/delay.h>
 #include "keycode.h"
 #include "host.h"
+#include "keymap.h"
 #include "print.h"
 #include "debug.h"
 #include "util.h"
@@ -53,7 +54,6 @@ static void mousekey_console_help(void);
 
 static uint8_t numkey2num(uint8_t code);
 static void switch_layer(uint8_t layer);
-static void clear_keyboard(void);
 
 
 typedef enum { ONESHOT, CONSOLE, MOUSEKEY } cmdstate_t;
@@ -164,9 +164,6 @@ static bool command_common(uint8_t code)
                 debug_enable   = false;
             } else {
                 print("\nDEBUG: enabled.\n");
-                debug_matrix   = true;
-                debug_keyboard = true;
-                debug_mouse    = true;
                 debug_enable   = true;
             }
             break;
@@ -205,7 +202,7 @@ static bool command_common(uint8_t code)
             print("VERSION: " STR(DEVICE_VER) "\n");
             break;
         case KC_T: // print timer
-            print("timer: "); phex16(timer_count>>16); phex16(timer_count); print("\n");
+            print_val_hex32(timer_count);
             break;
         case KC_P: // print toggle
             if (print_enable) {
@@ -218,25 +215,26 @@ static bool command_common(uint8_t code)
             break;
         case KC_S:
             print("\n\n----- Status -----\n");
-            print("host_keyboard_leds:"); phex(host_keyboard_leds()); print("\n");
+            print_val_hex8(host_keyboard_leds());
 #ifdef HOST_PJRC
-            print("UDCON: "); phex(UDCON); print("\n");
-            print("UDIEN: "); phex(UDIEN); print("\n");
-            print("UDINT: "); phex(UDINT); print("\n");
-            print("usb_keyboard_leds:"); phex(usb_keyboard_leds); print("\n");
-            print("usb_keyboard_protocol: "); phex(usb_keyboard_protocol); print("\n");
-            print("usb_keyboard_idle_config:"); phex(usb_keyboard_idle_config); print("\n");
-            print("usb_keyboard_idle_count:"); phex(usb_keyboard_idle_count); print("\n");
+            print_val_hex8(UDCON);
+            print_val_hex8(UDIEN);
+            print_val_hex8(UDINT);
+            print_val_hex8(usb_keyboard_leds);
+            print_val_hex8(usb_keyboard_protocol);
+            print_val_hex8(usb_keyboard_idle_config);
+            print_val_hex8(usb_keyboard_idle_count);
 #endif
 
 #ifdef HOST_VUSB
 #   if USB_COUNT_SOF
-            print("usbSofCount: "); phex(usbSofCount); print("\n");
+            print_val_hex8(usbSofCount);
 #   endif
 #endif
             break;
 #ifdef NKRO_ENABLE
         case KC_N:
+            clear_keyboard(); //Prevents stuck keys.
             keyboard_nkro = !keyboard_nkro;
             if (keyboard_nkro)
                 print("NKRO: enabled\n");
@@ -263,25 +261,19 @@ static bool command_common(uint8_t code)
 #endif
             break;
 #endif
+        case KC_ESC:
+        case KC_GRV:
         case KC_0:
-        case KC_F10:
+            clear_keyboard();
             switch_layer(0);
             break;
-        case KC_1:
-        case KC_F1:
-            switch_layer(1);
-            break;
-        case KC_2:
-        case KC_F2:
-            switch_layer(2);
-            break;
-        case KC_3:
-        case KC_F3:
-            switch_layer(3);
+        case KC_1 ... KC_9:
+            clear_keyboard();
+            switch_layer((code - KC_1) + 1);
             break;
-        case KC_4:
-        case KC_F4:
-            switch_layer(4);
+        case KC_F1 ... KC_F12:
+            clear_keyboard();
+            switch_layer((code - KC_F1) + 1);
             break;
         default:
             print("?");
@@ -350,6 +342,7 @@ static void mousekey_param_print(void)
     print("6: mk_wheel_time_to_max: "); pdec(mk_wheel_time_to_max); print("\n");
 }
 
+#define PRINT_SET_VAL(v)  print(#v " = "); print_dec(v); print("\n");
 static void mousekey_param_inc(uint8_t param, uint8_t inc)
 {
     switch (param) {
@@ -358,42 +351,42 @@ static void mousekey_param_inc(uint8_t param, uint8_t inc)
                 mk_delay += inc;
             else
                 mk_delay = UINT8_MAX;
-            print("mk_delay = "); pdec(mk_delay); print("\n");
+            PRINT_SET_VAL(mk_delay);
             break;
         case 2:
             if (mk_interval + inc < UINT8_MAX)
                 mk_interval += inc;
             else
                 mk_interval = UINT8_MAX;
-            print("mk_interval = "); pdec(mk_interval); print("\n");
+            PRINT_SET_VAL(mk_interval);
             break;
         case 3:
             if (mk_max_speed + inc < UINT8_MAX)
                 mk_max_speed += inc;
             else
                 mk_max_speed = UINT8_MAX;
-            print("mk_max_speed = "); pdec(mk_max_speed); print("\n");
+            PRINT_SET_VAL(mk_max_speed);
             break;
         case 4:
             if (mk_time_to_max + inc < UINT8_MAX)
                 mk_time_to_max += inc;
             else
                 mk_time_to_max = UINT8_MAX;
-            print("mk_time_to_max = "); pdec(mk_time_to_max); print("\n");
+            PRINT_SET_VAL(mk_time_to_max);
             break;
         case 5:
             if (mk_wheel_max_speed + inc < UINT8_MAX)
                 mk_wheel_max_speed += inc;
             else
                 mk_wheel_max_speed = UINT8_MAX;
-            print("mk_wheel_max_speed = "); pdec(mk_wheel_max_speed); print("\n");
+            PRINT_SET_VAL(mk_wheel_max_speed);
             break;
         case 6:
             if (mk_wheel_time_to_max + inc < UINT8_MAX)
                 mk_wheel_time_to_max += inc;
             else
                 mk_wheel_time_to_max = UINT8_MAX;
-            print("mk_wheel_time_to_max = "); pdec(mk_wheel_time_to_max); print("\n");
+            PRINT_SET_VAL(mk_wheel_time_to_max);
             break;
     }
 }
@@ -406,42 +399,42 @@ static void mousekey_param_dec(uint8_t param, uint8_t dec)
                 mk_delay -= dec;
             else
                 mk_delay = 0;
-            print("mk_delay = "); pdec(mk_delay); print("\n");
+            PRINT_SET_VAL(mk_delay);
             break;
         case 2:
             if (mk_interval > dec)
                 mk_interval -= dec;
             else
                 mk_interval = 0;
-            print("mk_interval = "); pdec(mk_interval); print("\n");
+            PRINT_SET_VAL(mk_interval);
             break;
         case 3:
             if (mk_max_speed > dec)
                 mk_max_speed -= dec;
             else
                 mk_max_speed = 0;
-            print("mk_max_speed = "); pdec(mk_max_speed); print("\n");
+            PRINT_SET_VAL(mk_max_speed);
             break;
         case 4:
             if (mk_time_to_max > dec)
                 mk_time_to_max -= dec;
             else
                 mk_time_to_max = 0;
-            print("mk_time_to_max = "); pdec(mk_time_to_max); print("\n");
+            PRINT_SET_VAL(mk_time_to_max);
             break;
         case 5:
             if (mk_wheel_max_speed > dec)
                 mk_wheel_max_speed -= dec;
             else
                 mk_wheel_max_speed = 0;
-            print("mk_wheel_max_speed = "); pdec(mk_wheel_max_speed); print("\n");
+            PRINT_SET_VAL(mk_wheel_max_speed);
             break;
         case 6:
             if (mk_wheel_time_to_max > dec)
                 mk_wheel_time_to_max -= dec;
             else
                 mk_wheel_time_to_max = 0;
-            print("mk_wheel_time_to_max = "); pdec(mk_wheel_time_to_max); print("\n");
+            PRINT_SET_VAL(mk_wheel_time_to_max);
             break;
     }
 }
@@ -551,24 +544,9 @@ static uint8_t numkey2num(uint8_t code)
 
 static void switch_layer(uint8_t layer)
 {
-    print("current_layer: "); phex(current_layer); print("\n");
-    print("default_layer: "); phex(default_layer); print("\n");
-    current_layer = layer;
+    print_val_hex8(current_layer);
+    print_val_hex8(default_layer);
     default_layer = layer;
-    print("switch to Layer: "); phex(layer); print("\n");
-}
-
-static void clear_keyboard(void)
-{
-    host_clear_keys();
-    host_clear_mods();
-    host_send_keyboard_report();
-
-    host_system_send(0);
-    host_consumer_send(0);
-
-#ifdef MOUSEKEY_ENABLE
-    mousekey_clear();
-    mousekey_send();
-#endif
+    current_layer = 0;
+    print("switch to "); print_val_hex8(layer);
 }