#include "timer.h"
#include "keyboard.h"
#include "bootloader.h"
-#include "layer_switch.h"
+#include "action_layer.h"
#include "eeconfig.h"
+#include "sleep_led.h"
+#include "led.h"
#include "command.h"
#ifdef MOUSEKEY_ENABLE
#include "mousekey.h"
#endif
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
# include "usb_keyboard.h"
# ifdef EXTRAKEY_ENABLE
# include "usb_extra.h"
# endif
#endif
-#ifdef HOST_VUSB
+#ifdef PROTOCOL_VUSB
# include "usbdrv.h"
#endif
***********************************************************/
static void command_common_help(void)
{
- print_enable = true;
print("\n\n----- Command Help -----\n");
print("c: enter console mode\n");
print("d: toggle debug enable\n");
print("Paus: jump to bootloader\n");
}
+#ifdef BOOTMAGIC_ENABLE
static void print_eeprom_config(void)
{
uint8_t eebyte;
eebyte = eeconfig_read_defalt_layer();
print("defalt_layer: "); print_hex8(eebyte); print("\n");
- eebyte = eeconfig_read_modifier();
- print("modifiers: "); print_hex8(eebyte); print("\n");
+ eebyte = eeconfig_read_keyconf();
+ print("keyconf: "); print_hex8(eebyte); print("\n");
+
+ keyconf kc;
+ kc = (keyconf){ .raw = eebyte };
+ print("keyconf.swap_control_capslock: "); print_hex8(kc.swap_control_capslock); print("\n");
+ print("keyconf.capslock_to_control: "); print_hex8(kc.capslock_to_control); print("\n");
+ print("keyconf.swap_lalt_lgui: "); print_hex8(kc.swap_lalt_lgui); print("\n");
+ print("keyconf.swap_ralt_rgui: "); print_hex8(kc.swap_ralt_rgui); print("\n");
+ print("keyconf.no_gui: "); print_hex8(kc.no_gui); print("\n");
+ print("keyconf.swap_grave_esc: "); print_hex8(kc.swap_grave_esc); print("\n");
+ print("keyconf.swap_backslash_backspace: "); print_hex8(kc.swap_backslash_backspace); print("\n");
}
+#endif
static bool command_common(uint8_t code)
{
static host_driver_t *host_driver = 0;
switch (code) {
+ case KC_Z:
+ // test breathing sleep LED
+ print("Sleep LED test\n");
+ sleep_led_toggle();
+ led_set(host_keyboard_leds());
+ break;
+#ifdef BOOTMAGIC_ENABLE
case KC_E:
print("eeprom config\n");
print_eeprom_config();
break;
+#endif
case KC_CAPSLOCK:
if (host_get_driver()) {
host_driver = host_get_driver();
command_common_help();
break;
case KC_C:
- print_enable = true;
debug_matrix = false;
debug_keyboard = false;
debug_mouse = false;
case KC_T: // print timer
print_val_hex32(timer_count);
break;
- case KC_P: // print toggle
- if (print_enable) {
- print("print disabled.\n");
- print_enable = false;
- } else {
- print_enable = true;
- print("print enabled.\n");
- }
- break;
case KC_S:
print("\n\n----- Status -----\n");
print_val_hex8(host_keyboard_leds());
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
print_val_hex8(UDCON);
print_val_hex8(UDIEN);
print_val_hex8(UDINT);
print_val_hex8(usb_keyboard_idle_count);
#endif
-#ifdef HOST_VUSB
+#ifdef PROTOCOL_PJRC
# if USB_COUNT_SOF
print_val_hex8(usbSofCount);
# endif
#ifdef EXTRAKEY_ENABLE
case KC_PSCREEN:
// TODO: Power key should take this feature? otherwise any key during suspend.
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
if (suspend && remote_wakeup) {
usb_remote_wakeup();
} else {
***********************************************************/
static void command_console_help(void)
{
- print_enable = true;
print("\n\n----- Console Help -----\n");
print("ESC/q: quit\n");
#ifdef MOUSEKEY_ENABLE
static void switch_default_layer(uint8_t layer)
{
- print("switch_default_layer: "); print_dec(default_layer); print(" to "); print_dec(layer); print("\n");
+ print("switch_default_layer: "); print_dec(biton32(default_layer_state));
+ print(" to "); print_dec(layer); print("\n");
default_layer_set(layer);
- overlay_clear();
clear_keyboard();
}