#include <util/delay.h>
#include "keycode.h"
#include "host.h"
+#include "keymap.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "timer.h"
#include "keyboard.h"
#include "bootloader.h"
+#include "layer_switch.h"
+#include "eeconfig.h"
#include "command.h"
+
#ifdef MOUSEKEY_ENABLE
#include "mousekey.h"
#endif
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
# include "usb_keyboard.h"
# ifdef EXTRAKEY_ENABLE
# include "usb_extra.h"
# endif
#endif
-#ifdef HOST_VUSB
+#ifdef PROTOCOL_VUSB
# include "usbdrv.h"
#endif
#endif
static uint8_t numkey2num(uint8_t code);
-static void switch_layer(uint8_t layer);
-static void clear_keyboard(void);
+static void switch_default_layer(uint8_t layer);
typedef enum { ONESHOT, CONSOLE, MOUSEKEY } cmdstate_t;
print("v: print device version & info\n");
print("t: print timer count\n");
print("s: print status\n");
+ print("e: print eeprom boot config\n");
#ifdef NKRO_ENABLE
print("n: toggle NKRO\n");
#endif
print("Paus: jump to bootloader\n");
}
+#ifdef BOOTMAGIC_ENABLE
+static void print_eeprom_config(void)
+{
+ uint8_t eebyte;
+
+ eebyte = eeconfig_read_debug();
+ print("debug: "); print_hex8(eebyte); print("\n");
+
+ eebyte = eeconfig_read_defalt_layer();
+ print("defalt_layer: "); print_hex8(eebyte); print("\n");
+
+ eebyte = eeconfig_read_keyconf();
+ print("keyconf: "); print_hex8(eebyte); print("\n");
+
+ keyconf kc = (keyconf){ .raw = eebyte };
+ print("keyconf.swap_control_capslock: "); print_hex8(kc.swap_control_capslock); print("\n");
+ print("keyconf.capslock_to_control: "); print_hex8(kc.capslock_to_control); print("\n");
+ print("keyconf.swap_lalt_lgui: "); print_hex8(kc.swap_lalt_lgui); print("\n");
+ print("keyconf.swap_ralt_rgui: "); print_hex8(kc.swap_ralt_rgui); print("\n");
+ print("keyconf.no_gui: "); print_hex8(kc.no_gui); print("\n");
+ print("keyconf.swap_grave_esc: "); print_hex8(kc.swap_grave_esc); print("\n");
+ print("keyconf.swap_backslash_backspace: "); print_hex8(kc.swap_backslash_backspace); print("\n");
+}
+#endif
+
static bool command_common(uint8_t code)
{
static host_driver_t *host_driver = 0;
switch (code) {
+#ifdef BOOTMAGIC_ENABLE
+ case KC_E:
+ print("eeprom config\n");
+ print_eeprom_config();
+ break;
+#endif
case KC_CAPSLOCK:
if (host_get_driver()) {
host_driver = host_get_driver();
debug_enable = false;
} else {
print("\nDEBUG: enabled.\n");
- debug_matrix = true;
- debug_keyboard = true;
- debug_mouse = true;
debug_enable = true;
}
break;
print("VERSION: " STR(DEVICE_VER) "\n");
break;
case KC_T: // print timer
- print("timer: "); phex16(timer_count>>16); phex16(timer_count); print("\n");
+ print_val_hex32(timer_count);
break;
case KC_P: // print toggle
if (print_enable) {
break;
case KC_S:
print("\n\n----- Status -----\n");
- print("host_keyboard_leds:"); phex(host_keyboard_leds()); print("\n");
-#ifdef HOST_PJRC
- print("UDCON: "); phex(UDCON); print("\n");
- print("UDIEN: "); phex(UDIEN); print("\n");
- print("UDINT: "); phex(UDINT); print("\n");
- print("usb_keyboard_leds:"); phex(usb_keyboard_leds); print("\n");
- print("usb_keyboard_protocol: "); phex(usb_keyboard_protocol); print("\n");
- print("usb_keyboard_idle_config:"); phex(usb_keyboard_idle_config); print("\n");
- print("usb_keyboard_idle_count:"); phex(usb_keyboard_idle_count); print("\n");
+ print_val_hex8(host_keyboard_leds());
+#ifdef PROTOCOL_PJRC
+ print_val_hex8(UDCON);
+ print_val_hex8(UDIEN);
+ print_val_hex8(UDINT);
+ print_val_hex8(usb_keyboard_leds);
+ print_val_hex8(usb_keyboard_protocol);
+ print_val_hex8(usb_keyboard_idle_config);
+ print_val_hex8(usb_keyboard_idle_count);
#endif
-#ifdef HOST_VUSB
+#ifdef PROTOCOL_PJRC
# if USB_COUNT_SOF
- print("usbSofCount: "); phex(usbSofCount); print("\n");
+ print_val_hex8(usbSofCount);
# endif
#endif
break;
#ifdef NKRO_ENABLE
case KC_N:
+ clear_keyboard(); //Prevents stuck keys.
keyboard_nkro = !keyboard_nkro;
if (keyboard_nkro)
print("NKRO: enabled\n");
#ifdef EXTRAKEY_ENABLE
case KC_PSCREEN:
// TODO: Power key should take this feature? otherwise any key during suspend.
-#ifdef HOST_PJRC
+#ifdef PROTOCOL_PJRC
if (suspend && remote_wakeup) {
usb_remote_wakeup();
} else {
#endif
break;
#endif
+ case KC_ESC:
+ case KC_GRV:
case KC_0:
- case KC_F10:
- switch_layer(0);
+ switch_default_layer(0);
break;
- case KC_1:
- case KC_F1:
- switch_layer(1);
+ case KC_1 ... KC_9:
+ switch_default_layer((code - KC_1) + 1);
break;
- case KC_2:
- case KC_F2:
- switch_layer(2);
- break;
- case KC_3:
- case KC_F3:
- switch_layer(3);
- break;
- case KC_4:
- case KC_F4:
- switch_layer(4);
+ case KC_F1 ... KC_F12:
+ switch_default_layer((code - KC_F1) + 1);
break;
default:
print("?");
print("6: mk_wheel_time_to_max: "); pdec(mk_wheel_time_to_max); print("\n");
}
+#define PRINT_SET_VAL(v) print(#v " = "); print_dec(v); print("\n");
static void mousekey_param_inc(uint8_t param, uint8_t inc)
{
switch (param) {
mk_delay += inc;
else
mk_delay = UINT8_MAX;
- print("mk_delay = "); pdec(mk_delay); print("\n");
+ PRINT_SET_VAL(mk_delay);
break;
case 2:
if (mk_interval + inc < UINT8_MAX)
mk_interval += inc;
else
mk_interval = UINT8_MAX;
- print("mk_interval = "); pdec(mk_interval); print("\n");
+ PRINT_SET_VAL(mk_interval);
break;
case 3:
if (mk_max_speed + inc < UINT8_MAX)
mk_max_speed += inc;
else
mk_max_speed = UINT8_MAX;
- print("mk_max_speed = "); pdec(mk_max_speed); print("\n");
+ PRINT_SET_VAL(mk_max_speed);
break;
case 4:
if (mk_time_to_max + inc < UINT8_MAX)
mk_time_to_max += inc;
else
mk_time_to_max = UINT8_MAX;
- print("mk_time_to_max = "); pdec(mk_time_to_max); print("\n");
+ PRINT_SET_VAL(mk_time_to_max);
break;
case 5:
if (mk_wheel_max_speed + inc < UINT8_MAX)
mk_wheel_max_speed += inc;
else
mk_wheel_max_speed = UINT8_MAX;
- print("mk_wheel_max_speed = "); pdec(mk_wheel_max_speed); print("\n");
+ PRINT_SET_VAL(mk_wheel_max_speed);
break;
case 6:
if (mk_wheel_time_to_max + inc < UINT8_MAX)
mk_wheel_time_to_max += inc;
else
mk_wheel_time_to_max = UINT8_MAX;
- print("mk_wheel_time_to_max = "); pdec(mk_wheel_time_to_max); print("\n");
+ PRINT_SET_VAL(mk_wheel_time_to_max);
break;
}
}
mk_delay -= dec;
else
mk_delay = 0;
- print("mk_delay = "); pdec(mk_delay); print("\n");
+ PRINT_SET_VAL(mk_delay);
break;
case 2:
if (mk_interval > dec)
mk_interval -= dec;
else
mk_interval = 0;
- print("mk_interval = "); pdec(mk_interval); print("\n");
+ PRINT_SET_VAL(mk_interval);
break;
case 3:
if (mk_max_speed > dec)
mk_max_speed -= dec;
else
mk_max_speed = 0;
- print("mk_max_speed = "); pdec(mk_max_speed); print("\n");
+ PRINT_SET_VAL(mk_max_speed);
break;
case 4:
if (mk_time_to_max > dec)
mk_time_to_max -= dec;
else
mk_time_to_max = 0;
- print("mk_time_to_max = "); pdec(mk_time_to_max); print("\n");
+ PRINT_SET_VAL(mk_time_to_max);
break;
case 5:
if (mk_wheel_max_speed > dec)
mk_wheel_max_speed -= dec;
else
mk_wheel_max_speed = 0;
- print("mk_wheel_max_speed = "); pdec(mk_wheel_max_speed); print("\n");
+ PRINT_SET_VAL(mk_wheel_max_speed);
break;
case 6:
if (mk_wheel_time_to_max > dec)
mk_wheel_time_to_max -= dec;
else
mk_wheel_time_to_max = 0;
- print("mk_wheel_time_to_max = "); pdec(mk_wheel_time_to_max); print("\n");
+ PRINT_SET_VAL(mk_wheel_time_to_max);
break;
}
}
return 0;
}
-static void switch_layer(uint8_t layer)
-{
- print("current_layer: "); phex(current_layer); print("\n");
- print("default_layer: "); phex(default_layer); print("\n");
- current_layer = layer;
- default_layer = layer;
- print("switch to Layer: "); phex(layer); print("\n");
-}
-
-static void clear_keyboard(void)
+static void switch_default_layer(uint8_t layer)
{
- host_clear_keys();
- host_clear_mods();
- host_send_keyboard_report();
-
- host_system_send(0);
- host_consumer_send(0);
-
-#ifdef MOUSEKEY_ENABLE
- mousekey_clear();
- mousekey_send();
-#endif
+ print("switch_default_layer: "); print_dec(default_layer); print(" to "); print_dec(layer); print("\n");
+ default_layer_set(layer);
+ overlay_clear();
+ clear_keyboard();
}
projects / tmk_firmware.git / blobdiff