Merge branch 'rhaberkorn-serial-mouse'

[tmk_firmware.git] / common / command.c

diff --git a/common/command.c b/common/command.c
index cb98e1d5f206803fbcc84cb2266aebaeed564502..2c65f0da78ca7117a442ad86a215858500255c4d 100644 (file)
--- a/common/command.c
+++ b/common/command.c
@@ -26,9 +26,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "timer.h"
 #include "keyboard.h"
 #include "bootloader.h"
-#include "layer_switch.h"
+#include "action_layer.h"
+#include "action_util.h"
 #include "eeconfig.h"
+#include "sleep_led.h"
+#include "led.h"
 #include "command.h"
+#include "backlight.h"
 
 #ifdef MOUSEKEY_ENABLE
 #include "mousekey.h"
@@ -104,11 +108,13 @@ static void command_common_help(void)
     print("x:  toggle matrix debug\n");
     print("k:  toggle keyboard debug\n");
     print("m:  toggle mouse debug\n");
-    print("p:  toggle print enable\n");
+#ifdef SLEEP_LED_ENABLE
+    print("z:  toggle sleep LED test\n");
+#endif
     print("v:  print device version & info\n");
     print("t:  print timer count\n");
     print("s:  print status\n");
-    print("e:  print eeprom boot config\n");
+    print("e:  print eeprom config\n");
 #ifdef NKRO_ENABLE
     print("n:  toggle NKRO\n");
 #endif
@@ -123,28 +129,37 @@ static void command_common_help(void)
 }
 
 #ifdef BOOTMAGIC_ENABLE
-static void print_eeprom_config(void)
+static void print_eeconfig(void)
 {
-    uint8_t eebyte;
-    
-    eebyte = eeconfig_read_debug();
-    print("debug: "); print_hex8(eebyte); print("\n");
-
-    eebyte = eeconfig_read_defalt_layer();
-    print("defalt_layer: "); print_hex8(eebyte); print("\n");
-
-    eebyte = eeconfig_read_keyconf();
-    print("keyconf: "); print_hex8(eebyte); print("\n");
-
-    keyconf kc;
-    kc = (keyconf){ .raw = eebyte };
-    print("keyconf.swap_control_capslock: "); print_hex8(kc.swap_control_capslock); print("\n");
-    print("keyconf.capslock_to_control: "); print_hex8(kc.capslock_to_control); print("\n");
-    print("keyconf.swap_lalt_lgui: "); print_hex8(kc.swap_lalt_lgui); print("\n");
-    print("keyconf.swap_ralt_rgui: "); print_hex8(kc.swap_ralt_rgui); print("\n");
-    print("keyconf.no_gui: "); print_hex8(kc.no_gui); print("\n");
-    print("keyconf.swap_grave_esc: "); print_hex8(kc.swap_grave_esc); print("\n");
-    print("keyconf.swap_backslash_backspace: "); print_hex8(kc.swap_backslash_backspace); print("\n");
+    print("default_layer: "); print_dec(eeconfig_read_default_layer()); print("\n");
+
+    debug_config_t dc;
+    dc.raw = eeconfig_read_debug();
+    print("debug_config.raw: "); print_hex8(dc.raw); print("\n");
+    print(".enable: "); print_dec(dc.enable); print("\n");
+    print(".matrix: "); print_dec(dc.matrix); print("\n");
+    print(".keyboard: "); print_dec(dc.keyboard); print("\n");
+    print(".mouse: "); print_dec(dc.mouse); print("\n");
+
+    keymap_config_t kc;
+    kc.raw = eeconfig_read_keymap();
+    print("keymap_config.raw: "); print_hex8(kc.raw); print("\n");
+    print(".swap_control_capslock: "); print_dec(kc.swap_control_capslock); print("\n");
+    print(".capslock_to_control: "); print_dec(kc.capslock_to_control); print("\n");
+    print(".swap_lalt_lgui: "); print_dec(kc.swap_lalt_lgui); print("\n");
+    print(".swap_ralt_rgui: "); print_dec(kc.swap_ralt_rgui); print("\n");
+    print(".no_gui: "); print_dec(kc.no_gui); print("\n");
+    print(".swap_grave_esc: "); print_dec(kc.swap_grave_esc); print("\n");
+    print(".swap_backslash_backspace: "); print_dec(kc.swap_backslash_backspace); print("\n");
+    print(".nkro: "); print_dec(kc.nkro); print("\n");
+
+#ifdef BACKLIGHT_ENABLE
+    backlight_config_t bc;
+    bc.raw = eeconfig_read_backlight();
+    print("backlight_config.raw: "); print_hex8(bc.raw); print("\n");
+    print(".enable: "); print_dec(bc.enable); print("\n");
+    print(".level: "); print_dec(bc.level); print("\n");
+#endif
 }
 #endif
 
@@ -152,10 +167,18 @@ static bool command_common(uint8_t code)
 {
     static host_driver_t *host_driver = 0;
     switch (code) {
+#ifdef SLEEP_LED_ENABLE
+        case KC_Z:
+            // test breathing sleep LED
+            print("Sleep LED test\n");
+            sleep_led_toggle();
+            led_set(host_keyboard_leds());
+            break;
+#endif
 #ifdef BOOTMAGIC_ENABLE
         case KC_E:
-            print("eeprom config\n");
-            print_eeprom_config();
+            print("eeconfig:\n");
+            print_eeconfig();
             break;
 #endif
         case KC_CAPSLOCK:
@@ -230,10 +253,48 @@ static bool command_common(uint8_t code)
             break;
         case KC_V: // print version & information
             print("\n\n----- Version -----\n");
-            print(STR(DESCRIPTION) "\n");
-            print(STR(MANUFACTURER) "(" STR(VENDOR_ID) ")/");
-            print(STR(PRODUCT) "(" STR(PRODUCT_ID) ") ");
-            print("VERSION: " STR(DEVICE_VER) "\n");
+            print("DESC: " STR(DESCRIPTION) "\n");
+            print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
+                  "PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
+                  "VER: " STR(DEVICE_VER) "\n");
+            print("BUILD: " STR(VERSION) " (" __TIME__ " " __DATE__ ")\n");
+            /* build options */
+            print("OPTIONS:"
+#ifdef PROTOCOL_PJRC
+            " PJRC"
+#endif
+#ifdef PROTOCOL_LUFA
+            " LUFA"
+#endif
+#ifdef PROTOCOL_VUSB
+            " VUSB"
+#endif
+#ifdef BOOTMAGIC_ENABLE
+            " BOOTMAGIC"
+#endif
+#ifdef MOUSEKEY_ENABLE
+            " MOUSEKEY"
+#endif
+#ifdef EXTRAKEY_ENABLE
+            " EXTRAKEY"
+#endif
+#ifdef CONSOLE_ENABLE
+            " CONSOLE"
+#endif
+#ifdef COMMAND_ENABLE
+            " COMMAND"
+#endif
+#ifdef NKRO_ENABLE
+            " NKRO"
+#endif
+#ifdef KEYMAP_SECTION_ENABLE
+            " KEYMAP_SECTION"
+#endif
+            " " STR(BOOTLOADER_SIZE) "\n");
+
+            print("GCC: " STR(__GNUC__) "." STR(__GNUC_MINOR__) "." STR(__GNUC_PATCHLEVEL__) 
+                  " AVR-LIBC: " __AVR_LIBC_VERSION_STRING__
+                  " AVR_ARCH: avr" STR(__AVR_ARCH__) "\n");
             break;
         case KC_T: // print timer
             print_val_hex32(timer_count);
@@ -241,13 +302,13 @@ static bool command_common(uint8_t code)
         case KC_S:
             print("\n\n----- Status -----\n");
             print_val_hex8(host_keyboard_leds());
+            print_val_hex8(keyboard_protocol);
+            print_val_hex8(keyboard_idle);
 #ifdef PROTOCOL_PJRC
             print_val_hex8(UDCON);
             print_val_hex8(UDIEN);
             print_val_hex8(UDINT);
             print_val_hex8(usb_keyboard_leds);
-            print_val_hex8(usb_keyboard_protocol);
-            print_val_hex8(usb_keyboard_idle_config);
             print_val_hex8(usb_keyboard_idle_count);
 #endif
 
@@ -565,8 +626,8 @@ static uint8_t numkey2num(uint8_t code)
 
 static void switch_default_layer(uint8_t layer)
 {
-    print("switch_default_layer: "); print_dec(default_layer); print(" to "); print_dec(layer); print("\n");
-    default_layer_set(layer);
-    overlay_clear();
+    print("switch_default_layer: "); print_dec(biton32(default_layer_state));
+    print(" to "); print_dec(layer); print("\n");
+    default_layer_set(1UL<<layer);
     clear_keyboard();
 }