### converter
* [ps2_usb](converter/ps2_usb/) - [PS/2 keyboard to USB][GH_ps2]
* [adb_usb](converter/adb_usb/) - [ADB keyboard to USB][GH_adb]
-* [m0110_usb](converter/m0110_usb) - [Machintosh 128K/512K/Plus keyboard to USB][GH_m0110]
+* [m0110_usb](converter/m0110_usb) - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110]
* [terminal_usb](converter/terminal_usb/) - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
* [news_usb](converter/news_usb/) - [Sony NEWS keyboard to USB][GH_news]
* [x68k_usb](converter/x68k_usb/) - [Sharp X68000 keyboard to USB][GH_x68k]
* [sun_usb](converter/sun_usb/) - [Sun] to USB(type4, 5 and 3?)
* [pc98_usb](converter/pc98_usb/) - [PC98] to USB
* [usb_usb](converter/usb_usb/) - USB to USB(experimental)
+* [ascii_usb](converter/ascii_usb/) - ASCII(Serial console terminal) to USB
+* [ibm4704_usb](converter/ibm4704_usb) - [IBM 4704 keyboard Converter][GH_ibm4704]
### keyboard
* [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
[GH_terminal]: http://geekhack.org/showwiki.php?title=Island:27272
[GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060
[GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483
+[GH_ibm4704]: http://geekhack.org/index.php?topic=54706.0
[HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
[Phantom]: http://geekhack.org/index.php?topic=26742
[GH60]: http://geekhack.org/index.php?topic=34959
-Magic Comannds
+Magic Commands
--------------
To see help press `Magic` + `H`.
**TBD**
### Boot Magic Configuration - Virtual DIP Switch
-Boot Magic are executed during boot up time. Press Magic key below then pulgin keyboard cable.
+Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
+To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h).
+
#### General
- Skip reading EEPROM to start with default configuration(`ESC`)
- Clear configuration stored in EEPROM to reset configuration(`Backspace`)
#### Keymap
- Swap Control and CapsLock(`Left Control`)
-- Change CapsLock to Control(`Casp Lock`)
+- Change CapsLock to Control(`Caps Lock`)
- Swap LeftAlt and Gui(`Left Alt`)
- Swap RightAlt and Gui(`Right Alt`)
- Disable Gui(`Left Gui`)
**TBD**
-Mechanical Locking support for CapsLock
----------------------------------------
-To enable this feature define these two macros in `config.h` and use `KC_LCAP` for locking CapsLock in keymap instead of normal `KC_CAPS`. Resync option tries to keep lock switch state consistent with keyboard LED state.
+Mechanical Locking support
+--------------------------
+This feature makes it possible for you to use mechanical switch for `CapsLock`, `NumLock` or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LNUM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Resync option tries to keep lock switch state consistent with keyboard LED state.
- #define CAPSLOCK_LOCKING_ENABLE
- #define CAPSLOCK_LOCKING_RESYNC_ENABLE
+ #define LOCKING_SUPPORT_ENABLE
+ #define LOCKING_RESYNC_ENABLE
Start Your Own Project
-Debuging
+Debugging
--------
Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack.
* converter/ - protocol converter projects
* doc/ - documents
* common.mk - Makefile for common
-* protoco.mk - Makefile for protocol
+* protocol.mk - Makefile for protocol
* rules.mk - Makefile for build rules
### Common
-Conding Style
+Coding Style
-------------
- Doesn't use Tab to indent, use 4-spaces instead.