-t.m.k. Keyboard Firmware Collection
-====================================
-This is a keyboard firmware with some features for Atmel AVR controller.
+TMK Keyboard Firmware Collection
+================================
+This is a keyboard firmware with some useful features for Atmel AVR controller.
Source code is available here: <http://github.com/tmk/tmk_keyboard>
Features
--------
+These features can be used in your keyboard.
+
* Multi-layer Keymap - Multiple keyboard layouts with layer switching
* Mouse key - Mouse control with keyboard
* System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up
* Macro - Very primitive at this time
* Keyboard Tricks - Oneshot modifier and modifier with tapping feature
* Debug Console - Messages for debug and interaction with firmware
+* Virtual DIP Switch - Configurations stored EEPROM(Boot Magic)
+* Locking CapsLock - Mechanical switch support for CapsLock
+* Breathing Sleep LED - Sleep indicator with charm during USB suspend
Projects
* [usb_usb](converter/usb_usb/) - USB to USB(experimental)
### keyboard
-* [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard professional][GH_hhkb]
-* [macway](keyboard/macway/) - [Compact keyboard mod][GH_macway]
-* [hbkb](keyboard/hbkb/) - [Happy Buckling sprint keyboard(IBM Model M mod)][GH_hbkb]
-* [IIgs_Standard](keyboard/IIgs_Standard/) - Apple [IIGS] keyboard mod(by JeffreySung)
-* [hid_liber](keyboard/hid_liber/) - [HID liberation controller][HID_liber](by alaricljs)
-* [phantom](keyboard/phantom/) - [Phantom keyboard][PHANTOM] (by Tranquilite)
-* [gh60](keyboard/gh60/) - [GH60 keyboard][GH60]
+* [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
+* [gh60](keyboard/gh60/) - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board**
+* [hbkb](keyboard/hbkb/) - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
+* [hid_liber](keyboard/hid_liber/) - [HID liberation][HID_liber] controller (by alaricljs)
+* [phantom](keyboard/phantom/) - [Phantom] keyboard (by Tranquilite)
+* [IIgs_Standard](keyboard/IIgs/) - Apple [IIGS] keyboard mod(by JeffreySung)
+* [macway](keyboard/macway/) - [Compact keyboard mod][GH_macway] [retired]
[GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930
[GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047
[GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060
[GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483
[HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
-[PHANTOM]: http://geekhack.org/index.php?topic=26742
+[Phantom]: http://geekhack.org/index.php?topic=26742
[GH60]: http://geekhack.org/index.php?topic=34959
+[GH60_proto]: http://geekhack.org/index.php?topic=37570.0
[PC98]: http://en.wikipedia.org/wiki/NEC_PC-9801
[Sun]: http://en.wikipedia.org/wiki/Sun-3
[IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS
-Build & Program
----------------
-### Install Tools
-First, you need tools to build firmware and program your controller. I assume you are on Windows here.
-
-1. Install [WinAVR][winavr]. This is old but works well for this purpose. `WinAVR` is a tool set to build firmware including C compiler(gcc) and make commands. You can use [CrossPack][crosspack] instead if you are on Mac.
-
-2. Install [Atmel FLIP][flip]. `FLIP` is a tool to program(load) firmware into AVR controller(ATMega32u4) via DFU bootloader. ATMega32u4 has DFU bootloader by factory default. You can use [dfu-programmer][dfu-prog] instead if you are on Mac.
-
-3. Install driver for DFU bootloader. At first time you start DFU bootloader on Chip 'Found New Hardware Wizard' will come up on Windows. If you install device driver properly you can find chip name like 'ATmega32U4' under 'LibUSB-Win32 Devices' tree on 'Device Manager'. If not you shall need to update its driver on 'Device Manager'. You will find the driver in `FLIP` install directory like: C:\Program Files (x86)\Atmel\Flip 3.4.5\usb\. If you use `dfu-programmer` install its driver.
-
-If you use PJRC Teensy you don't need step 2 and 3, just get [Teensy loader][teensy-loader].
-
-
-### Download source
-You can find firmware source at github: https://github.com/tmk/tmk_keyboard
-
-If you are familiar with `Git` tools you are recommended to use it.
-If not you can download zip archive from: https://github.com/tmk/tmk_keyboard/archive/master.zip
-
-
-### Build firmware
-1. Open terminal window to get access to commands. You can use `cmd` in Windows or `Terminal.app` on Mac OSX. In Windows press `Windows` key and `R` then enter `cmd` in Run command dialog showing up.
-
-2. Move to project directory in the firmware source.
-
- cd tmk_keyboard/{keyboard or converter}/<project>
-
-3. Build firmware using GNU `make` command. You'll see <project>_<variant>.hex file in that directory unless something unexpected occurs in build process.
-
- mkae -f Makefile.<variant> clean
- make -f Makefile.<variant>
-
-
-
-
-### Program Controller
-Sock AVR USB chip including ATmega32U4 has DFU bootloader by factory default, you can use DFU tools for this purpose. `FLIP` is a DFU tool on Windows offered by Atmel. Open source command line DFU tool `dfu-programmer` also supports AVR chips, which run on Linux, Mac OSX and even Windows. If you have a PJRC Teensy you should use `Teensy Loader`.
-
-#### DFU bootloader
-To program AVR chip with DFU bootloader use `FLIP` or `dfu-programmer`.
-If you have a proper program command in `Makefile` just type this.
-
-`FLIP` has two version of tool, GUI app and command line program. If you want GUI see tutorial section below.
-To use command line tool run this command. Note that you need to set PATH variable properly.
-
- $ make -f Makefile.<variant> flip
-
-To program with `dfu-programmer` run:
-
- $ make -f Makefile.<variant> dfu
-
-#### Teensy
-If you have PJRC Teensy see instruction of `Teensy Loader` at: <http://www.pjrc.com/teensy/loader.html>
-Or use this command if you have command line version of Teensy Loader installed.
-
- $ make -f Makefile.<variant> teensy
+License
+-------
+**GPLv2** or later. Some protocol files are under **Modified BSD License**.
+LUFA, PJRC and V-USB stack have their own license respectively.
-#### Other programmer
-You may want to use other you favorite programmer like `avrdude` with AVRISPmkII, Aruduino or USBasp. In that case you can still use make target `program` for build with configuring PROGRAM_CMD in Makefile.
- $ make -f Makefile.<variant> program
+Build Firmware and Program Controller
+-------------------------------------
+See [doc/build.md](doc/build.md).
-#### FLIP GUI tutorial
-1. On menu bar click Device -> Select, then. `ATmega32u4`.
-2. On menu bar click Settings -> Communication -> USB, then click 'Open' button on 'USB Port Connection' dialog.
-At this point you'll see greyouted widgets on the app get colored and ready.
+Change your keymap
+------------------
+See [doc/keymap.md](doc/keymap.md).
-3. On menu bar click File -> Load HEX File, then select your firmware hex file on File Selector dialog.
-4. On 'Operations Flow' panel click 'Run' button to load the firmware binary to the chip. Note that you should keep 'Erase', 'Blank Check', 'Program' and 'Verify' check boxes selected.
-5. Re-plug USB cord or click 'Start Application' button to restart your controller.
-Done.
-See also these instaructions if you need.
-- <http://code.google.com/p/micropendous/wiki/LoadingFirmwareWithFLIP>
-- <http://www.atmel.com/Images/doc7769.pdf>
+Magic Comannds
+--------------
+To see help press `Magic` + `H`.
+ `Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory.
-[winavr]: http://winavr.sourceforge.net/
-[crosspack]: http://www.obdev.at/products/crosspack/index.html
-[flip]: http://www.atmel.com/tools/FLIP.aspx
-[dfu-prog]: http://dfu-programmer.sourceforge.net/
-[teensy-loader]:http://www.pjrc.com/teensy/loader.html
+Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
+ ----- Command Help -----
+ c: enter console mode
+ d: toggle debug enable
+ x: toggle matrix debug
+ k: toggle keyboard debug
+ m: toggle mouse debug
+ p: toggle print enable
+ v: print device version & info
+ t: print timer count
+ s: print status
+ e: print eeprom config
+ n: toggle NKRO
+ 0/F10: switch to Layer0
+ 1/F1: switch to Layer1
+ 2/F2: switch to Layer2
+ 3/F3: switch to Layer3
+ 4/F4: switch to Layer4
+ PScr: power down/remote wake-up
+ Caps: Lock Keyboard(Child Proof)
+ Paus: jump to bootloader
+**TBD**
-Makefile Options
-----------------
-### 1. MCU and Frequency.
+### Boot Magic Configuration - Virtual DIP Switch
+Boot Magic are executed during boot up time. Press Magic key below then pulgin keyboard cable.
+Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
- MCU = atmega32u4 # Teensy 2.0
- #MCU = at90usb1286 # Teensy++ 2.0
- F_CPU = 16000000
+#### EEPROM
+- Skip reading EEPROM(`ESC`)
+- Clear configuration stored in EEPROM(`Backspace`)
-### 2. Features
-Note that ***comment out*** to disable them.
+#### Bootloader
+- Kick up Bootloader(`B`)
- MOUSEKEY_ENABLE = yes # Mouse keys
- PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
- EXTRAKEY_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
- NKRO_ENABLE = yes # USB Nkey Rollover
+#### Debug
+- Debug enable(`D`)
+- Debug matrix enable(`D`+`X`)
+- Debug keyboard enable(`D`+`K`)
+- Debug mouse enable(`D`+`M`)
-### 3. Programmer
-Optional. Set proper command for your controller, bootloader and programmer.
+#### Keymap
+- Swap Control and CapsLock(`Left Control`)
+- Change CapsLock to Control(`Casp Lock`)
+- Swap LeftAlt and Gui(`Left Alt`)
+- Swap RightAlt and Gui(`Right Alt`)
+- Disable Gui(`Left Gui`)
+- Swap Grave and Escape(`Grave`)
+- Swap BackSlash and BackSpace(`Back Slash`)
- # for PJRC Teensy
- PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+#### Default Layer
+- Set Default Layer to 0(`0`)
+- Set Default Layer to 0(`1`)
+- Set Default Layer to 0(`2`)
+- Set Default Layer to 0(`3`)
- # for Atmel chip with DFU bootloader
- PROGRAM_CMD = dfu-programmer $(MCU) flash $(TARGET).hex
+**TBD**
- # avrdude with other methods
- PROGRAM_CMD = avrdude -p $(MCU) -c avrispmkII -P USB -U flash:w:$(TARGET).hex
- PROGRAM_CMD = avrdude -p $(MCU) -c usbasp -U flash:w:$(TARGET).hex
- PROGRAM_CMD = avrdude -p $(MCU) -c arduino -P COM1 -b 57600 -U flash:w:$(TARGET).hex
+Mechanical Locking support for CapsLock
+---------------------------------------
+To enable this feature define these two macros in `config.h` and use `KC_LCAP` for locking CapsLock in keymap instead of normal `KC_CAPS`. Resync option tries to keep lock switch state consistent with keyboard LED state.
+
+ #define CAPSLOCK_LOCKING_ENABLE
+ #define CAPSLOCK_LOCKING_RESYNC_ENABLE
-Config.h Options
-----------------
-### 1. USB vendor/product ID and device description
+Start Your Own Project
+-----------------------
+**TBD**
+### Config.h Options
+#### 1. USB vendor/product ID and device description
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xBEEF
- /* device description */
#define MANUFACTURER t.m.k.
#define PRODUCT Macway mod
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod
-### 2. Keyboard matrix configuration
+#### 2. Keyboard matrix configuration
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
#define MATRIX_HAS_GHOST
-### 3. Mouse keys
-
-### 4. PS/2 mouse
-
-### 5. COMMAND key combination
-
- #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
-Change your keymap
-------------------
-[keymap.md](doc/keymap.md)
-
+Architecture
+------------
+ Architecture Diagram
+ +---------------+---------------+-------------+
+ | Host | Keyboard | Matrix, LED |
+ ___________ |-----------+-+ +-------------+ | +-----------|
+ / /| Keys/Mouse | Protocol |d| | Action | | | Protocol |
+ /__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix |
+ |.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________
+ || || |----------->| PJRC |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /|
+ || Host || | Console | iWRAP(BT)|e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / /
+ ||________||/.<-----------| UART |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / /
+ `_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ /
+ |_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/
+ +---------------------------------------------+ Keyboard
-Magic Comannds
---------------
-To see help press `Magic` + `H`.
-
- `Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory.
-
-Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
-
- ----- Command Help -----
- c: enter console mode
- d: toggle debug enable
- x: toggle matrix debug
- k: toggle keyboard debug
- m: toggle mouse debug
- p: toggle print enable
- v: print device version & info
- t: print timer count
- s: print status
- 0/F10: switch to Layer0
- 1/F1: switch to Layer1
- 2/F2: switch to Layer2
- 3/F3: switch to Layer3
- 4/F4: switch to Layer4
- PScr: power down/remote wake-up
- Caps: Lock Keyboard(Child Proof)
- Paus: jump to bootloader
-
-### Boot Magic
-Magic commands are executed when boot time. Press `Magic` command key then pulgin.
-
-Define these macros in config.h.
-
- IS_BOOTMAGIC_DEBUG
- IS_BOOTMAGIC_BOOTLOADER
-
-***TODO: sample impl***
-See `keyboard/hhkb/config.h` for sample.
-
-
-
-Start Your Own Project
------------------------
-
-
-
-Files & Directories
+Files and Directories
-------------------
### Top
* common/ - common codes
* rules.mk - Makefile for build rules
### Common
-* action.[ch]
-* action_macro.[ch]
-* bootloader.[ch]
-* command.[ch]
-* controller_teensy.h
-* debug.[ch]
-* host.[ch]
+* host.h
* host_driver.h
-* keyboard.[ch]
+* keyboard.h
+* command.h
+* keymap.h
+* action.h
* keycode.h
-* keymap.[ch]
-* led.h
* matrix.h
-* mousekey.[ch]
-* print.[ch]
+* led.h
+* mousekey.h
* report.h
+* debug.h
+* print.h
+* bootloader.h
* sendchar.h
-* sendchar_null.c
-* sendchar_uart.c
-* timer.[ch]
-* uart.[ch]
-* util.[ch]
+* timer.h
+* util.h
### Keyboard Protocols
* lufa/ - LUFA USB stack
-License
--------
-Under `GPL` 2 or later. Some protocol files are under `Modified BSD License`.
-LUFA, PJRC and V-USB stack have their own license respectively.
+Conding Style
+-------------
+- Doesn't use Tab to indent, use 4-spaces instead.
+
+
+
+Other Keyboard Firmware Projects
+------------------
+See [doc/other_projects.md](doc/other_projects.md).
projects / qmk_firmware.git / blobdiff